NetBSD 1.3H (ELENA) #11: Wed Sep  2 12:15:03 JST 1998
    fukachan@elena:/usr/sup/src/sys/arch/i386/compile/ELENA
cpu0: family 5 model 0 step 1
cpu0: AMD K5 (586-class)
NOTICE: this kernel does not support Pentium CPU class
NOTICE: lowering CPU class to i486
real mem  = 66715648
avail mem = 59817984
using 840 buffers containing 3440640 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x1250 (rev. 0x03)
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x8086 product 0x7000 (rev. 0x01)
vendor 0x8086 product 0x7010 (IDE mass storage, interface 0x80) at pci0 dev 7 function 1 not configured
vendor 0x5333 product 0x88f0 (VGA display) at pci0 dev 10 function 0 not configured
ahc1 at pci0 dev 12 function 0
ahc1: interrupting at irq 11
ahc1: aic7880 Single Channel, SCSI Id=7, 16 SCBs
scsibus0 at ahc1 channel 0: 8 targets
ahc1: target 0 synchronous at 10.0MHz, offset = 0xf
sd0 at scsibus0 targ 0 lun 0: <IBM, DCAS-34330, S65A> SCSI2 0/direct fixed
sd0: 4134MB, 8205 cyl, 6 head, 171 sec, 512 bytes/sect x 8467200 sectors
ahc1: target 1 synchronous at 10.0MHz, offset = 0xf
sd1 at scsibus0 targ 1 lun 0: <QUANTUM, XP32150, 581H> SCSI2 0/direct fixed
sd1: 2050MB, 3907 cyl, 10 head, 107 sec, 512 bytes/sect x 4199760 sectors
isa0 at pcib0
ep0 at isa0 port 0x300-0x30f irq 10: 3Com 3C509 Ethernet
ep0: address 00:60:8c:cb:95:41, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep0: 10baseT, 10base5/AUI (default 10baseT)
com0 at isa0 port 0x3f8-0x3ff irq 4: ns8250 or ns16450, no fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns8250 or ns16450, no fifo
fe_simple_probe: ff & 70 != 0
ate_match: ate_find failed
fe_simple_probe: ff & 70 != 0
fmv_match: fmv_find failed
sb0 at isa0 port 0x220-0x237 irq 5 drq 1 drq2 5: dsp v4.13
audio0 at sb0
opl at sb0 not configured
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: 1.44MB, 80 cyl, 2 head, 18 sec
biomask 840 netmask c40 ttymask c42
WARNING: old BSD partition ID!
disklabel: BIOS sees chs 8205/6/171 as 22400/6/63
boot device: sd0
root on sd0a dumps on sd0b
WARNING: old BSD partition ID!
disklabel: BIOS sees chs 8205/6/171 as 22400/6/63
WARNING: old BSD partition ID!
disklabel: BIOS sees chs 8205/6/171 as 22400/6/63
WARNING: old BSD partition ID!
disklabel: BIOS sees chs 8205/6/171 as 22400/6/63
root file system type: ffs
/dev/sd0a: file system not clean (fs_flags=4); please fsck(8)
/dev/sd0g: file system not clean (fs_flags=4); please fsck(8)
/dev/sd0f: file system not clean (fs_flags=4); please fsck(8)
/dev/sd0a: file system not clean (fs_flags=4); please fsck(8)
/dev/sd0h: file system not clean (fs_flags=4); please fsck(8)
/dev/sd1a: file system not clean (fs_flags=4); please fsck(8)