[HOME] [github] [twitter] [blog] [fml4] [fml8] [北海道] Powered by NetBSD and [nuinui.net] .

NetBSD dmesg database

dmesg unknown_486DX_24M

NetBSD 1.2G (IRIS) #2: Fri Sep 19 13:32:13 JST 1997
    fukachan@iris:/var/src/sys/arch/i386/compile/IRIS
cpu0: Intel 486DX (486-class)
real mem  = 24772608
avail mem = 21131264
using 328 buffers containing 1343488 bytes of memory
mainbus0 (root)
isa0 at mainbus0
aha0 at isa0 port 0x330-0x333 irq 11 drq 5
aha0: model AHA-1542CF, firmware C.0
aha0: unlocking mailbox interface
aha0: async, parity
scsibus0 at aha0: 8 targets
sd0 at scsibus0 targ 0 lun 0: <CONNER, CFP1080S, 4040> SCSI2 0/direct fixed
sd0: 1030MB, 3658 cyl, 6 head, 96 sec, 512 bytes/sect x 2110812 sectors
ep0 at isa0 port 0x300-0x30f irq 9: 3Com 3C509 Ethernet
ep0: MAC address 00:20:af:25:df:7b
ep0: 8KB byte-wide FIFO, 5:3 Rx:Tx split, utp/aui (default utp)
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 840 netmask a40 ttymask a42
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
stray interrupt 7
stray interrupt 7

dmesg unknown_AMD_K5_32M

NetBSD 1.2G (IRIS) #7: Sun Sep 21 14:55:53 JST 1997
    fukachan@iris:/var/src/sys/arch/i386/compile/IRIS
cpu0: family 5 model 0 step 1
cpu0: AMD K5 (586-class)
real mem  = 33157120
avail mem = 29184000
using 430 buffers containing 1761280 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82439 (Triton II) TXC Host Bridge (rev. 0x03)
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371SB (Triton II) PCI-ISA Bridge (rev. 0x01)
Intel 82371SB (Triton II) IDE controller (IDE mass storage, interface 0x80) at pci0 dev 7 function 1 not configured
Chips and Technologies 65548 (VGA display) at pci0 dev 10 function 0 not configured
ahc1 at pci0 dev 12 function 0
ahc1: interrupting at irq 11
ahc1: aic7880 Single Channel, SCSI Id=7, 16 SCBs
scsibus0 at ahc1 channel 0: 8 targets
ahc1: target 0 synchronous at 10.0MHz, offset = 0xf
sd0 at scsibus0 targ 0 lun 0: <FUJITSU, M2684S-512, 2026> SCSI2 0/direct fixed
sd0: 507MB, 2380 cyl, 6 head, 72 sec, 512 bytes/sect x 1039329 sectors
ahc1: target 1 synchronous at 10.0MHz, offset = 0xf
sd1 at scsibus0 targ 1 lun 0: <FUJITSU, M2684S-512, 2026> SCSI2 0/direct fixed
sd1: 507MB, 2380 cyl, 6 head, 72 sec, 512 bytes/sect x 1039329 sectors
isa0 at pcib0
ep0 at isa0 port 0x300-0x30f irq 10: 3Com 3C509 Ethernet
ep0: MAC address 00:60:8c:cb:95:41
ep0: 8KB byte-wide FIFO, 5:3 Rx:Tx split, utp/aui (default utp)
com0 at isa0 port 0x3f8-0x3ff irq 4: ns8250 or ns16450, no fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns8250 or ns16450, no fifo
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: 1.44MB 80 cyl, 2 head, 18 sec
biomask 840 netmask c40 ttymask c42
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs

dmesg HITACHI_Flora_K2 6

13511: old priority -19, new priority -19
NetBSD 1.3H (ELENA) #11: Wed Sep  2 12:15:03 JST 1998
    fukachan@elena:/usr/sup/src/sys/arch/i386/compile/ELENA
cpu0: family 5 model 8 step 0
cpu0: AMD K6-3D (586-class)
NOTICE: this kernel does not support Pentium CPU class
NOTICE: lowering CPU class to i486
real mem  = 33136640
avail mem = 28680192
using 430 buffers containing 1761280 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
vendor 0x10b9 product 0x1531 (host bridge, revision 0xb3) at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 2 function 0
pcib0: vendor 0x10b9 product 0x1533 (rev. 0xc3)
fxp0 at pci0 dev 4 function 0: Intel EtherExpress Pro 10+/100B Ethernet
fxp0: interrupting at irq 10
fxp0: Ethernet address 00:00:e2:1e:58:65
PHY oui 0xaa00 model 0x15 rev 0x0 at fxp0 phy 1 not configured
vendor 0x1002 product 0x4c50 (VGA display, revision 0xdc) at pci0 dev 5 function 0 not configured
vendor 0x10b9 product 0x5229 (IDE mass storage, interface 0xfa, revision 0xc1) at pci0 dev 11 function 0 not configured
vendor 0x10b9 product 0x5237 (USB serial bus, interface 0x10, revision 0x03) at pci0 dev 18 function 0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atapibus0 at wdc0
wd0 at wdc0 drive 0: <QUANTUM FIREBALL EX3.2A>
wd0: using 16-sector 16-bit pio transfers, lba mode
wd0 3079MB, 6256 cyl, 16 head, 63 sec, 512 bytes/sect x 6306048 sectors
wdc1 at isa0 port 0x170-0x177 irq 15
atapibus1 at wdc1
cd0 at atapibus1 drive 0: <HITACHI CDR-8435, , 0010> type 5 cdrom removable
fe_simple_probe: ff & 70 != 0
ate_match: ate_find failed
fe_simple_probe: ff & 70 != 0
fmv_match: fmv_find failed
sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.02
audio0 at sb0
opl at sb0 not configured
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
biomask c040 netmask c440 ttymask c442
WARNING: old BSD partition ID!
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

dmesg unknown_486DX_16M

NetBSD 1.3H (ELENA) #14: Mon Sep 21 07:53:03 JST 1998
    fukachan@elena:/usr/sup/src/sys/arch/i386/compile/ELENA
cpu0: Intel 486DX (486-class)
real mem  = 16384000
avail mem = 13144064
using 225 buffers containing 921600 bytes of memory
mainbus0 (root)
isa0 at mainbus0
ep0 at isa0 port 0x300-0x30f irq 10: 3Com 3C509 Ethernet
ep0: address 00:a0:24:3f:ab:27, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep0: 10baseT, 10base5/AUI (default 10baseT)
ep1 at isa0 port 0x280-0x28f irq 9: 3Com 3C509 Ethernet
ep1: address 00:a0:24:15:24:ad, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep1: 10baseT, 10base5/AUI, 10base2/BNC (default 10baseT)
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atapibus0 at wdc0
wd0 at wdc0 drive 0: <WDC AC2340H>
wd0: using 16-sector 16-bit pio transfers, chs mode
wd0 325MB, 1010 cyl, 12 head, 55 sec, 512 bytes/sect x 666600 sectors
wd1 at wdc0 drive 1: <QUANTUM LP120A GM120A01X>
wd1: using 8-sector 16-bit pio transfers, chs mode
wd1 116MB, 901 cyl, 5 head, 53 sec, 512 bytes/sect x 238765 sectors
fe_simple_probe: ff & 70 != 0
ate_match: ate_find failed
fe_simple_probe: ff & 70 != 0
fmv_match: fmv_find failed
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
biomask 4040 netmask 4640 ttymask 4642
WARNING: old BSD partition ID!
WARNING: old BSD partition ID!
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
IP Filter: initialized.  Default = pass all, Logging = disabled
stray interrupt 7
stray interrupt 7

dmesg unknown_486DX2_32M

NetBSD 1.3J (ELENA) #1: Tue Mar  2 10:03:43 PST 1999
    fukachan@elena.sapporo.iij.ad.jp:/usr/sup/src/sys/arch/i386/compile/ELENA
cpu0: family 4 model 3 step 5
cpu0: Intel 486DX2 (486-class)
real mem  = 33161216
avail mem = 28041216
using 430 buffers containing 1761280 bytes of memory
mainbus0 (root)
isa0 at mainbus0
(bha probe): bha_cmd, cmd/data port empty 13
aha0 at isa0 port 0x330-0x333 irq 11 drq 6
aha0: model AHA-1542CF, firmware E.0
aha0: unlocking mailbox interface
aha0: async, parity
scsibus0 at aha0: 8 targets, 8 luns per target
sd0 at scsibus0 targ 0 lun 0: <QUANTUM, FIREBALL1080S, 1Q09> SCSI2 0/direct fixed
sd0: 1042MB, 3835 cyl, 4 head, 139 sec, 512 bytes/sect x 2134305 sectors
ne1 at isa0 port 0x300-0x31f irq 10
ne1: NE2000 Ethernet
ne1: Ethernet address 00:00:e8:d4:2d:3a
com0 at isa0 port 0x3f8-0x3ff irq 4: ns8250 or ns16450, no fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns8250 or ns16450, no fifo
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask 840 netmask c40 ttymask c42
boot device: sd0
root on sd0a dumps on sd0b
WARNING: old BSD partition ID!
root file system type: ffs

dmesg unknown_AMD_K5_64M

NetBSD 1.3H (ELENA) #11: Wed Sep  2 12:15:03 JST 1998
    fukachan@elena:/usr/sup/src/sys/arch/i386/compile/ELENA
cpu0: family 5 model 0 step 1
cpu0: AMD K5 (586-class)
NOTICE: this kernel does not support Pentium CPU class
NOTICE: lowering CPU class to i486
real mem  = 66715648
avail mem = 59817984
using 840 buffers containing 3440640 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x1250 (rev. 0x03)
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x8086 product 0x7000 (rev. 0x01)
vendor 0x8086 product 0x7010 (IDE mass storage, interface 0x80) at pci0 dev 7 function 1 not configured
vendor 0x5333 product 0x88f0 (VGA display) at pci0 dev 10 function 0 not configured
ahc1 at pci0 dev 12 function 0
ahc1: interrupting at irq 11
ahc1: aic7880 Single Channel, SCSI Id=7, 16 SCBs
scsibus0 at ahc1 channel 0: 8 targets
ahc1: target 0 synchronous at 10.0MHz, offset = 0xf
sd0 at scsibus0 targ 0 lun 0: <IBM, DCAS-34330, S65A> SCSI2 0/direct fixed
sd0: 4134MB, 8205 cyl, 6 head, 171 sec, 512 bytes/sect x 8467200 sectors
ahc1: target 1 synchronous at 10.0MHz, offset = 0xf
sd1 at scsibus0 targ 1 lun 0: <QUANTUM, XP32150, 581H> SCSI2 0/direct fixed
sd1: 2050MB, 3907 cyl, 10 head, 107 sec, 512 bytes/sect x 4199760 sectors
isa0 at pcib0
ep0 at isa0 port 0x300-0x30f irq 10: 3Com 3C509 Ethernet
ep0: address 00:60:8c:cb:95:41, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep0: 10baseT, 10base5/AUI (default 10baseT)
com0 at isa0 port 0x3f8-0x3ff irq 4: ns8250 or ns16450, no fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns8250 or ns16450, no fifo
fe_simple_probe: ff & 70 != 0
ate_match: ate_find failed
fe_simple_probe: ff & 70 != 0
fmv_match: fmv_find failed
sb0 at isa0 port 0x220-0x237 irq 5 drq 1 drq2 5: dsp v4.13
audio0 at sb0
opl at sb0 not configured
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: 1.44MB, 80 cyl, 2 head, 18 sec
biomask 840 netmask c40 ttymask c42
WARNING: old BSD partition ID!
disklabel: BIOS sees chs 8205/6/171 as 22400/6/63
boot device: sd0
root on sd0a dumps on sd0b
WARNING: old BSD partition ID!
disklabel: BIOS sees chs 8205/6/171 as 22400/6/63
WARNING: old BSD partition ID!
disklabel: BIOS sees chs 8205/6/171 as 22400/6/63
WARNING: old BSD partition ID!
disklabel: BIOS sees chs 8205/6/171 as 22400/6/63
root file system type: ffs
/dev/sd0a: file system not clean (fs_flags=4); please fsck(8)
/dev/sd0g: file system not clean (fs_flags=4); please fsck(8)
/dev/sd0f: file system not clean (fs_flags=4); please fsck(8)
/dev/sd0a: file system not clean (fs_flags=4); please fsck(8)
/dev/sd0h: file system not clean (fs_flags=4); please fsck(8)
/dev/sd1a: file system not clean (fs_flags=4); please fsck(8)

dmesg unknown_Cyrix686

NetBSD 1.3G (ELENA) #10: Mon Aug 31 02:21:30 JST 1998
    fukachan@elena:/usr/sup/src/sys/arch/i386/compile/ELENA
cpu0: Cyrix 6x86 (486-class)
real mem  = 20578304
avail mem = 17022976
using 276 buffers containing 1130496 bytes of memory
mainbus0 (root)
Warning: broken PCI-Host bridge detected; disabling memory-mapped access
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled
vendor 0x1039 product 0x0496 (host bridge, revision 0x31) at pci0 dev 5 function 0 not configured
vendor 0x5333 product 0x8880 (VGA display) at pci0 dev 15 function 0 not configured
isa0 at mainbus0
ne1 at isa0 port 0x300-0x31f irq 10
ne1: NE2000 Ethernet
ne1: Ethernet address 00:80:ad:1b:df:a3
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atapibus0 at wdc0
wd0 at wdc0 drive 0: <IBM-DHEA-36481>
wd0: using 16-sector 16-bit pio transfers, lba mode
wd0 6197MB, 12592 cyl, 16 head, 63 sec, 512 bytes/sect x 12692736 sectors
fe_simple_probe: ff & 70 != 0
ate_match: ate_find failed
fe_simple_probe: ff & 70 != 0
fmv_match: fmv_find failed
sb0 at isa0 port 0x220-0x22f irq 5 drq 1: dsp v2.02
audio0 at sb0
opl at sb0 not configured
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
biomask 4040 netmask 4440 ttymask 4442
WARNING: old BSD partition ID!
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

dmesg SONY_NeWS_3470D

Copyright (c) 1996, 1997, 1998, 1999
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.3I (KATRI) #5: Fri Jan 22 16:30:21 JST 1999
    fukachan@katri:/usr/sup/src/sys/arch/newsmips/compile/KATRI
real mem  = 16744448
avail mem = 13115392
using 408 buffers containing 1671168 bytes of memory
SONY NET WORK STATION, Model NWS-3470D, Machine ID #10361
mainbus0 (root)
cpu0 at mainbus0: cpu0: MIPS R3000 CPU Rev. 2.0 with MIPS R3010 FPC Rev. 2.0
cpu0: 64kb Instruction, 64kb Data, direct mapped cache
hb0 at mainbus0
mkclock0 at hb0 addr 0xbff407f8
fb0 at hb0 addr 0x88000000: NWB-253 (1024 x 768 1 plane) (console)
zsc0 at hb0 addr 0xbfec0000
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
kb0 at hb0 addr 0xbfd00000
ms0 at hb0 addr 0xbfd00004
le0 at hb0 addr 0xbff80000: address 08:00:46:00:9a:e6
le0: 8 receive buffers, 2 transmit buffers
sc0 at hb0 addr 0xbfe00100
scsibus0 at sc0: 8 targets, 8 luns per target
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST52160N, 0285> SCSI2 0/direct fixed
sd0: 2069MB, 6536 cyl, 4 head, 162 sec, 512 bytes/sect x 4238282 sectors
sd1 at scsibus0 targ 1 lun 0: <IBM, DPES-31080, S31Q> SCSI2 0/direct fixed
sd1: 1034MB, 4903 cyl, 4 head, 108 sec, 512 bytes/sect x 2118144 sectors
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
le0: excessive collisions, tdr 2

dmesg alpha_200

NetBSD 1.3.3 (GENERIC) #7: Fri Dec 11 21:32:58 PST 1998
    ross@zeta:/usr/src/sys/arch/alpha/compile/GENERIC
AlphaStation 200 4/100 ("Mustang II"), 100MHz
8192 byte page size, 1 processor.
real mem = 67108864 (2064384 reserved for PROM, 65044480 used by NetBSD)
avail mem = 51380224
using 794 buffers containing 6504448 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21064A (pass 1.1)
apecs0 at mainbus0: DECchip 21071 Core Logic chipset
apecs0: DC21071-CA pass 2, 64-bit memory bus
apecs0: DC21071-DA pass 2
pci0 at apecs0 bus 0
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 0 function 0 not configured
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 1 function 0 not configured
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 2 function 0 not configured
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 3 function 0 not configured
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 4 function 0 not configured
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 5 function 0 not configured
ncr0 at pci0 dev 6 function 0: ncr 53c810 fast10 scsi
ncr0: interrupting at isa irq 11
ncr0: minsync=25, maxsync=206, maxoffs=8, 16 dwords burst, normal dma fifo
ncr0: single-ended, open drain IRQ driver
ncr0: restart (scsi reset).
scsibus0 at ncr0: 8 targets
sd0 at scsibus0 targ 0 lun 0: <DEC, RZ28M    (C) DEC, 0568> SCSI2 0/direct fixed
sd0: sd0(ncr0:0:0): 10.0 MB/s (100 ns, offset 8)
2007MB, 3045 cyl, 16 head, 84 sec, 512 bytes/sect x 4110480 sectors
sio0 at pci0 dev 7 function 0: Intel 82378ZB System I/O (SIO) (rev. 0x84)
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 8 function 0 not configured
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 9 function 0 not configured
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 10 function 0 not configured
de0 at pci0 dev 11 function 0
de0: interrupting at isa irq 5
de0: DEC 21040 [10Mb/s] pass 2.4
de0: address 00:00:f8:20:62:d4
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 12 function 0 not configured
vga0 at pci0 dev 13 function 0: S3 product 0x8a01 (rev. 0x01)
wscons0 at vga0: console
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 14 function 0 not configured
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 15 function 0 not configured
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 16 function 0 not configured
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 17 function 0 not configured
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 18 function 0 not configured
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 19 function 0 not configured
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 20 function 0 not configured
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 21 function 0 not configured
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 22 function 0 not configured
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 23 function 0 not configured
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 24 function 0 not configured
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 25 function 0 not configured
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 26 function 0 not configured
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 27 function 0 not configured
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 28 function 0 not configured
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 29 function 0 not configured
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 30 function 0 not configured
unknown vendor 0x081d product 0x8028 (class 0x80, subclass 0x28, interface 0x08, revision 0x1d) at pci0 dev 31 function 0 not configured
isa0 at sio0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x3bc-0x3bf irq 7
pcppi0 at isa0 port 0x60-0x64
pcprobe: reset error 1
pckbd0 at pcppi0
pms0 at pcppi0
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
root on sd0a dumps on sd0b
root file system type: ffs
de0: enabling 10baseT port

dmesg HA8000 30B2

NetBSD 1.4.1 (SOFS) #2: Mon Dec  6 11:59:09 JST 1999
    fukachan@kazumi:/usr/NetBSD/NetBSD-release/src/sys/arch/i386/compile/SOFS
cpu0: family 6 model 8 step 3
cpu0: Intel Pentium Pro, II or III (686-class)
real mem  = 267976704
avail mem = 251097088
using 2048 buffers containing 8388608 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o enabled, memory enabled
vga1 at pci1 dev 0 function 0: ATI Technologies product 0x4c42 (rev. 0xdc)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <FUJITSU MPF3102AT>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 9773MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 20015856 sectors
wd0: 32-bits data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4, Ultra-DMA mode 3, Ultra-DMA mode 2
wd1 at pciide0 channel 0 drive 1: <FUJITSU MPF3102AT>
wd1: drive supports 16-sector pio transfers, lba addressing
wd1: 9773MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 20015856 sectors
wd1: 32-bits data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4, Ultra-DMA mode 3, Ultra-DMA mode 2
pciide0: primary channel interrupting at irq 14
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel ignored (disabled)
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: can't map i/o space
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured
ESS Technology Inc SOLO-1 AudioDrive (audio multimedia, revision 0x01) at pci0 dev 9 function 0 not configured
ahc1 at pci0 dev 14 function 0
ahc1: interrupting at irq 11
ahc1: aic7860 Single Channel, SCSI Id=7, 3 SCBs
scsibus0 at ahc1 channel 0: 8 targets, 8 luns per target
fxp0 at pci0 dev 16 function 0: Intel EtherExpress Pro 10+/100B Ethernet
fxp0: interrupting at irq 10
fxp0: Ethernet address 00:00:e2:25:d0:8c
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37b irq 7
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
opms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask 4840 netmask 4c40 ttymask 5cc2
wscons: wskbd0 glued to wsdisplay0 (console)
wd1: no disk label
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

dmesg ThinkPad_220

NetBSD 1.4.1 (RISUKO2) #1: Wed Dec 15 21:03:11 JST 1999
    fukachan@kazumi:/usr/NetBSD/NetBSD-release/src/sys/arch/i386/compile/RISUKO2
cpu0: Intel 386DX (386-class)
real mem  = 6094848
avail mem = 4403200
using 100 buffers containing 409600 bytes of memory
mainbus0 (root)
isa0 at mainbus0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns8250 or ns16450, no fifo
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK1422FCV>
wd0: drive supports 1-sector pio transfers, chs addressing
wd0: 82MB, 988 cyl, 10 head, 17 sec, 512 bytes/sect x 167960 sectors
vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
wsdisplay0 at vga0: console (80x25, vt100 emulation)
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
opms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff: using irq 3
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
ne0 at pcmcia0 function 0 port 0x340-0x34f port 0x350-0x35f
ne0: I-O DATA PCLA/T Ethernet
ne0: Ethernet address 00:40:26:5c:7c:a8
pcmcia1 at pcic0 controller 0 socket 1
biomask 4040 netmask 4040 ttymask 504a
wscons: wskbd0 glued to wsdisplay0 (console)
boot device: wd0
root on wd0a dumps on wd0b
clock: unknown CMOS layout
root file system type: ffs
pcmcia0: card irq 5

dmesg SS20

NetBSD 1.4.1 (DOROTHY) #2: Thu Dec  9 11:41:49 JST 1999
    fukachan@dorothy.sapporo.iij.ad.jp:/usr/src/sys/arch/sparc/compile/DOROTHY
real mem = 133488640
avail mem = 121114624
using 1629 buffers containing 6672384 bytes of memory
bootpath: /iommu@f,e0000000/sbus@f,e0001000/espdma@f,400000/esp@f,800000/sd@3,0
mainbus0 (root): SUNW,SPARCstation-20
cpu0 at mainbus0: TMS390Z50 v0 or TMS390Z55 @ 75 MHz, on-chip FPU
cpu0: physical 20K instruction (64 b/l), 16K data (32 b/l), 1024K external (32 b/l): cache enabled
obio0 at mainbus0
clock0 at obio0 slot 0 offset 0x200000: mk48t08 (eeprom)
timer0 at obio0 slot 0 offset 0x300000 delay constant 35
zs0 at obio0 slot 0 offset 0x100000 level 12 softpri 6
zstty0 at zs0 channel 0 (console)
zstty1 at zs0 channel 1
zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6
kbd0 at zs1 channel 0
ms0 at zs1 channel 1
fdc0 at obio0 slot 0 offset 0x700000 level 11 softpri 4: chip 82077
auxreg0 at obio0 slot 0 offset 0x800000
power0 at obio0 slot 0 offset 0xa01000 level 2
iommu0 at mainbus0 ioaddr 0xe0000000: version 0x3/0x1, page-size 4096, range 64MB
sbus0 at iommu0: clock = 25 MHz
dma0 at sbus0 slot 15 offset 0x400000: rev 2
esp0 at dma0 slot 15 offset 0x800000 level 4: ESP200, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
probe(esp0:3:0): max sync rate 10.00Mb/s
sd0 at scsibus0 targ 3 lun 0: <SEAGATE, ST32430W, 0300> SCSI2 0/direct fixed
sd0: 2049MB, 3992 cyl, 9 head, 116 sec, 512 bytes/sect x 4197405 sectors
ledma0 at sbus0 slot 15 offset 0x400010: rev 2
le0 at ledma0 slot 15 offset 0xc00000 level 6: address 08:00:20:7a:5a:38
le0: 8 receive buffers, 2 transmit buffers
SUNW,bpp at sbus0 slot 15 offset 0x4800000 level 2 (ipl 3) not configured
SUNW,DBRIe at sbus0 slot 14 offset 0x10000 level 9 not configured
cgsix0 at sbus0 slot 2 offset 0x0 level 9: SUNW,501-2325, 1152 x 900, rev 11
eccmemctl0 at mainbus0: version 0x0/0x2
root on sd0a dumps on sd0b
root file system type: ffs

dmesg SS5

NetBSD 1.4.2 (AHODORI) #0: Tue Apr 11 12:08:23 JST 2000
    fukachan@tomoyo:/usr/src/sys/arch/sparc/compile/AHODORI
real mem = 33169408
avail mem = 21733376
using 2048 buffers containing 8388608 bytes of memory
bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@3,0
mainbus0 (root): SUNW,SPARCstation-5
cpu0 at mainbus0DVMA coherent : MB86907 @ 170 MHz, on-chip FPU
cpu0: 16K instruction (32 b/l), 16K data (32 b/l), 512K external (32 b/l): cache enabled
obio0 at mainbus0
clock0 at obio0 slot 0 offset 0x200000: mk48t08 (eeprom)
timer0 at obio0 slot 0 offset 0xd00000 delay constant 82
zs0 at obio0 slot 0 offset 0x100000 level 12 softpri 6
zstty0 at zs0 channel 0 (console)
zstty1 at zs0 channel 1
zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6
kbd0 at zs1 channel 0
ms0 at zs1 channel 1
slavioconfig at obio0 slot 0 offset 0x800000 not configured
auxreg0 at obio0 slot 0 offset 0x900000
power0 at obio0 slot 0 offset 0x910000 level 2
fdc0 at obio0 slot 0 offset 0x400000 level 11: no drives attached
iommu0 at mainbus0 addr 0x10000000: version 0x5/0x0, page-size 4096, range 64MB
sbus0 at iommu0: clock = 21.250 MHz
dma0 at sbus0 slot 5 offset 0x8400000: rev 2
esp0 at dma0 slot 5 offset 0x8800000 level 4: ESP200, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
probe(esp0:3:0): max sync rate 10.00Mb/s
sd0 at scsibus0 targ 3 lun 0: <IBM, DORS32160SUN2.1G, WA7A> SCSI2 0/direct fixed
sd0: 2063MB, 6703 cyl, 5 head, 126 sec, 512 bytes/sect x 4226725 sectors
SUNW,bpp at sbus0 slot 5 offset 0xc800000 level 2 (ipl 3) not configured
ledma0 at sbus0 slot 5 offset 0x8400010: rev 2
le0 at ledma0 slot 5 offset 0x8c00000 level 6: address 08:00:20:87:06:f0
le0: 8 receive buffers, 2 transmit buffers
audiocs0 at sbus0 slot 4 offset 0xc000000 level 9: CS4231A
audio0 at audiocs0: full duplex
power-management at sbus0 slot 4 offset 0xa000000 not configured
cgsix0 at sbus0 slot 3 offset 0x0 level 9: SUNW,501-2325, 1152 x 900, rev 11
root on sd0a dumps on sd0b
root file system type: ffs

dmesg Macintosh_7600_200

root on md0aNetBSD 1.5 (GENERIC) #1: Sun Nov 19 13:58:47 PST 2000
    matt@duel.local:/u1/kobj/GENERIC
CPU: 604ev (Revision 204)
total memory = 128 MB
avail memory = 113 MB
using 1664 buffers containing 6656 KB of memory
mainbus0 (root)
cpu0 at mainbus0bandit0 at mainbus0
pci0 at bandit0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer Bandit Host-PCI Bridge (rev. 0x03)
obio0 at pci0 dev 16 function 0: addr 0xf3000000
esp0 at obio0 offset 0x10000 irq 12: NCR53C94, 25MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
mc0 at obio0 offset 0x11000: irq 14,2,3: address 00:05:02:66:1f:61
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
awacs at obio0 offset 0x14000 not configured
swim3 at obio0 offset 0x15000 not configured
adb0 at obio0 offset 0x16000 irq 18: 2 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: keyboard II (Japanese layout)
wskbd0 at akbd0: console keyboard
ams0 at adb0 addr 3: 1-button, 100 dpi mouse
wsmouse0 at ams0
mesh0 at obio0 offset 0x18000 irq 13: 50MHz, SCSI ID 7
scsibus1 at mesh0: 8 targets, 8 luns per target
nvram0 at obio0 offset 0x1d000
bandit1 at mainbus0
pci1 at bandit1 bus 1
pci1: i/o space, memory space enabled
ofb0 at pci1 dev 11 function 0: Apple Computer Control
ofb0: 640 x 480, 8bpp
wsdisplay0 at ofb0: console (std, vt100 emulation), using wskbd0
Apple Computer PlanB (undefined subclass 0x00, revision 0x01) at pci1 dev 13 function 0 not configured
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus1 target 0 lun 0: <QUANTUM, FIREBALL_TM2100S, 300Z> SCSI2 0/direct fixed
sd0: 2051 MB, 6810 cyl, 4 head, 154 sec, 512 bytes/sect x 4201344 sectors
cd0 at scsibus1 target 3 lun 0: <MATSHITA, CD-ROM CR-8012, 1.0f> SCSI2 5/cdrom removable
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs

dmesg SS4_75

NetBSD 1.5 (GENERIC) #1: Wed Nov 29 00:29:52 MET 2000
    root@flambard:/usr/src/sys/arch/sparc/compile/GENERIC
total memory = 65384 KB
avail memory = 60584 KB
using 128 buffers containing 512 KB of memory
bootpath: /sbus0/esp@0,800000/sd@3,0
mainbus0 (root): SUNW,Sun 4/75
cpu0 at mainbus0: cache chip bug; trap page uncached: CY7C601 @ 40 MHz, TMS390C602A FPU
cpu0: 64K byte write-through, 32 bytes/line, hw flush: cache enabled
memreg0 at mainbus0 ioaddr 0xf4000000
clock0 at mainbus0 ioaddr 0xf2000000: mk48t02 (eeprom)
timer0 at mainbus0 ioaddr 0xf3000000 ipl 10 delay constant 17
auxreg0 at mainbus0 ioaddr 0xf7400003
zs0 at mainbus0 ioaddr 0xf1000000 ipl 12 softpri 6
zstty0 at zs0 channel 0 (console i/o)
zstty1 at zs0 channel 1
zs1 at mainbus0 ioaddr 0xf0000000 ipl 12 softpri 6
kbd0 at zs1 channel 0
ms0 at zs1 channel 1
audioamd0 at mainbus0 ioaddr 0xf7201000 ipl 13 softpri 4
audio0 at audioamd0: full duplex
sbus0 at mainbus0 ioaddr 0xf8000000: clock = 20 MHz
dma0 at sbus0 slot 0 offset 0x400000: rev 1+
esp0 at sbus0 slot 0 offset 0x800000 level 3: ESP100A, 20MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
le0 at sbus0 slot 0 offset 0xc00000 level 5: address 08:00:20:10:bf:6a
le0: 8 receive buffers, 2 transmit buffers
dma1 at sbus0 slot 2 offset 0x81000: rev esc
esp1 at dma1 slot 2 offset 0x80000 level 3: ESP200, 25MHz, SCSI ID 7
scsibus1 at esp1: 8 targets, 8 luns per target
lebuffer0 at sbus0 slot 2 offset 0x40000: 128K memory
le1 at lebuffer0 slot 2 offset 0x60000 level 5: address 08:00:20:10:bf:6a
le1: 64 receive buffers, 16 transmit buffers
cgthree0 at sbus0 slot 3 offset 0x0 level 7: SUNW,501-1718, 1152 x 900
cgthree0: attached to /dev/fb
fdc0 at mainbus0 ioaddr 0xf7200000 ipl 11 softpri 4: chip 82072
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
scsibus0: waiting 2 seconds for devices to settle...
probe(esp0:1:0): max sync rate 4.03MB/s
sd0 at scsibus0 target 1 lun 0: <FUJITSU, M2622S-512, 0805> SCSI1 0/direct fixed
sd0: 314 MB, 1429 cyl, 7 head, 64 sec, 512 bytes/sect x 644868 sectors
probe(esp0:3:0): max sync rate 4.03MB/s
sd1 at scsibus0 target 3 lun 0: <FUJITSU, M2694ES-512, 8134> SCSI2 0/direct fixed
sd1: 1033 MB, 1819 cyl, 15 head, 77 sec, 512 bytes/sect x 2117025 sectors
scsibus1: waiting 2 seconds for devices to settle...
root on sd1a dumps on sd1b
root file system type: ffs

dmesg FMV_6667SL5

NetBSD 1.5.2 (GENERIC) #3: Sat Aug 18 23:37:05 CEST 2001
    he@hamster.urc.uninett.no:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III (Coppermine) (686-class), 664.54 MHz
total memory = 126 MB
avail memory = 112 MB
using 1644 buffers containing 6576 KB of memory
BIOS32 rev. 0 found at 0xfd880
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82810E Memory Controller Hub (rev. 0x03)
vga1 at pci0 dev 1 function 0: Intel 82810E Graphics Controller (rev. 0x03)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0: Intel 82801AA Hub-to-PCI Bridge (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
fxp0 at pci1 dev 3 function 0: Intel i82557 Ethernet, rev 8
fxp0: interrupting at irq 5
fxp0: Ethernet address 00:e0:00:03:00:2c, 10/100 Mb/s
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801AA LPC Interface Bridge (rev. 0x02)
pciide0 at pci0 dev 31 function 1: Intel 82801AA IDE Controller (ICH) (rev. 0x02)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <FUJITSU MPF3102AT>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 9736 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 19941264 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <SAMSUNG CD-ROM  SC-148A, , B400> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 31 function 2: Intel 82801AA USB Controller (rev. 0x02)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82801AA SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
Intel 82801AA AC-97 Audio Controller (audio multimedia, revision 0x02) at pci0 dev 31 function 5 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask ef4d netmask ef6d ttymask ffef
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0

dmesg ThinkPad_T42

NetBSD 2.0_RC4 (RUDO20) #6: Mon Jan 31 15:35:27 JST 2005
	fukachan@rudo.home.fml.org:/sys-latest/arch/i386/compile/RUDO20
total memory = 1022 MB
avail memory = 993 MB
BIOS32 rev. 0 found at 0xfd750
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium M (Banias) (686-class), 1495.23 MHz, id 0x695
cpu0: features a7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR>
cpu0: features a7e9f9bf<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features a7e9f9bf<FXSR,SSE,SSE2,TM,SBF>
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82855PM MCH Host Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: Intel 82855PM Host-to-AGP Bridge (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility M7 LW (AGP) (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
uhci0 at pci0 dev 29 function 0: Intel 82801DB/DBM USB UHCI Controller #1 (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801DB/DBM USB UHCI Controller #2 (rev. 0x01)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801DB/DBM USB UHCI Controller #3 (rev. 0x01)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801DB/DBM USB EHCI Controller (rev. 0x01)
ehci0: interrupting at irq 11
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-to-PCI Bridge (rev. 0x81)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
cbb0 at pci2 dev 0 function 0: Texas Instruments PCI4520 PCI-CardBus Bridge w/ OHCI IEEE 1394 Controller (rev. 0x01)
cbb1 at pci2 dev 0 function 1: Texas Instruments PCI4520 PCI-CardBus Bridge w/ OHCI IEEE 1394 Controller (rev. 0x01)
wm0 at pci2 dev 1 function 0: Intel i82540EP 1000BASE-T Ethernet, rev. 3
wm0: interrupting at irq 11
wm0: 32-bit 33MHz PCI bus
wm0: 64 word (6 address bits) MicroWire EEPROM
wm0: Ethernet address 00:0d:60:74:89:00
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 4
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
Intel product 0x4220 (miscellaneous network, revision 0x05) at pci2 dev 2 function 0 not configured
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 6 device 0
pcmcia1 at cardslot1
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801DB ISA Bridge (rev. 0x01)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
Intel 82801DB/DBM SMBus Controller (SMBus serial bus, revision 0x01) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
auich0: interrupting at irq 11
auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo
auich0: ac97: ext id 601<AC97_22,AMAP,VRA>
Intel 82801DB/DBM AC97 Modem Controller (modem communications, revision 0x01) at pci0 dev 31 function 6 not configured
isa0 at pcib0
lpt2 at isa0 port 0x3bc-0x3bf irq : polled
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
apm0: battery life expectancy: 100%
apm0: A/C state: on
apm0: battery charge state: high
auich0: measured ac97 link rate at 48003 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
wd0 at atabus0 drive 0: <HTS548040M9AT00>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ-812, , K103> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg DELL_Dimension_XPS_T600r

NetBSD 2.0.2 (GENERIC) #0: Wed Mar 23 08:53:42 UTC 2005
	jmc@faith.netbsd.org:/home/builds/ab/netbsd-2-0-2-RELEASE/i386/200503220140Z-obj/home/builds/ab/netbsd-2-0-2-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 255 MB
avail memory = 242 MB
BIOS32 rev. 0 found at 0xfd790
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 598.65 MHz, id 0x681
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Nvidia Corporation RIVA TNT2 Model 64 (rev. 0x15)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured
ex0 at pci0 dev 13 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0x78)
ex0: interrupting at irq 11
ex0: MAC address 00:50:da:cd:34:53
bmtphy0 at ex0 phy 24: Broadcom 3c905C internal PHY, rev. 7
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: read port 0x203
sb1 at isapnp0 port 0x220/16,0x330/2,0x388/4 irq 5 drq 1,5
sb1: Creative SB16 PnP Audio: dsp v4.13
audio0 at sb1: full duplex, mmap, independent
mpu0 at sb1
midi1 at mpu0: SB MPU-401 MIDI UART
opl0 at sb1: model OPL3
midi2 at opl0: SB Yamaha OPL3
wdc2 at isapnp0 port 0x168/8,0x36e/2 irq 10: Creative SB16 PnP IDE
atabus2 at wdc2 channel 0
isapnp0: <Creative SB16 PnP, PNPFFFF, , Reserved> port 0x100/1 not configured
joy0 at isapnp0 port 0x200/8
joy0: Creative SB16 PnP Game
joy0: joystick not connected
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <ST3120026A>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
wd1 at atabus1 drive 0: <IC35L120AVV207-0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 115 GB, 239340 cyl, 16 head, 63 sec, 512 bytes/sect x 241254720 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd2 at atabus1 drive 1: <Maxtor 7L250R0>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 233 GB, 486344 cyl, 16 head, 63 sec, 512 bytes/sect x 490234752 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
wd2(piixide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg FMV_6667SL5

NetBSD 2.0.2 (GENERIC) #0: Wed Mar 23 08:53:42 UTC 2005
	jmc@faith.netbsd.org:/home/builds/ab/netbsd-2-0-2-RELEASE/i386/200503220140Z-obj/home/builds/ab/netbsd-2-0-2-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 126 MB
avail memory = 116 MB
BIOS32 rev. 0 found at 0xfd880
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 664.54 MHz, id 0x683
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82810E Memory Controller Hub (rev. 0x03)
pchb0: random number generator enabled
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
vga1 at pci0 dev 1 function 0: Intel 82810E Graphics Controller (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ppb0 at pci0 dev 30 function 0: Intel 82801AA Hub-to-PCI Bridge (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
fxp0 at pci1 dev 3 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 5
fxp0: Ethernet address 00:e0:00:03:00:2c
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801AA LPC Interface Bridge (rev. 0x02)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801AA IDE Controller (ICH) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 31 function 2: Intel 82801AA USB Controller (rev. 0x02)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82801AA SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801AA (ICH) AC-97 Audio
auich0: interrupting at irq 9
auich0: ac97: Crystal CS4299 codec; headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
auich0: ac97: ext id 201<AMAP,VRA>
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
auich0: measured ac97 link rate at 47993 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <FUJITSU MPF3102AT>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9736 MB, 19783 cyl, 16 head, 63 sec, 512 bytes/sect x 19941264 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <SAMSUNG CD-ROM  SC-148A, , B400> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
boot device: wd0
root on wd0i dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg SUN_Netra_X1

console is /pci@1f,0/pci@1,1/isa@7/serial@0,3f8
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.0 (GENERIC) #0: Mon Dec 19 04:05:17 UTC 2005
	builds@b4.netbsd.org:/home/builds/ab/netbsd-3-0-RELEASE/sparc64/200512182024Z-obj/home/builds/ab/netbsd-3-0-RELEASE/src/sys/arch/sparc64/compile/GENERIC
total memory = 512 MB
avail memory = 488 MB
bootpath: /pci@1f,0/pci@1,0/scsi@8,0/disk@0,0
mainbus0 (root): SUNW,UltraAX-i2: hostid 8316a163
cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 500 MHz, version 0 FPU
cpu0: 32K instruction (32 b/l), 16K data (32 b/l), 1024K external (64 b/l)
psycho0 at mainbus0
SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0
psycho_alloc_extent: prom_getprop failed
psycho_alloc_extent: prom_getprop failed
DVMA map: c0000000 to e0000000
IOTSB: 85c000 to 8dc000
pci0 at psycho0
pci0: i/o space, memory space enabled
ppb0 at pci0 dev 1 function 1: Sun Microsystems Simba PCI bridge (rev. 0x13)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ebus0 at pci1 dev 12 function 0
ebus0: Sun Microsystems PCIO Ebus2 (US III), revision 0x01
flashprom at ebus0 addr 0-fffff not configured
clock0 at ebus0 addr 0-1fff: mk48t59
ebus_attach: idprom: incomplete
SUNW,lomh at ebus0 addr 200000-200003 ipl 42 not configured
Acer Labs M7101 Power Management Controller (miscellaneous prehistoric) at pci1 dev 3 function 0 not configured
ebus1 at pci1 dev 7 function 0
ebus1: Acer Labs M1543 PCI-ISA Bridge, revision 0x00
power at ebus1 addr 2000-2007 ipl 37 not configured
com0 at ebus1 addr 3f8-3ff ipl 43: ns16550a, working fifo
com0: console
com1 at ebus1 addr 2e8-2ef ipl 43: ns16550a, working fifo
gem0 at pci1 dev 12 function 1: Sun Microsystems ERI Ethernet (rev. 0x01)
gem0: interrupting at ivec 3006
gem0: Ethernet address 00:03:ba:16:a1:63, 2KB RX fifo, 2KB TX fifo
ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0008bb, model 0x0002, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0 at pci1 dev 12 function 3: Sun Microsystems USB controller (rev. 0x01)
ohci0: interrupting at ivec 24
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Sun Microsystem OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
aceride0 at pci1 dev 13 function 0
aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
aceride0: bus-master DMA support present
aceride0: primary channel configured to native-PCI mode
aceride0: using ivec 180c for native-PCI interrupt
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to native-PCI mode
atabus1 at aceride0 channel 1
gem1 at pci1 dev 5 function 1: Sun Microsystems ERI Ethernet (rev. 0x01)
gem1: interrupting at ivec 301c
gem1: Ethernet address 00:03:ba:16:a1:63, 2KB RX fifo, 2KB TX fifo
ukphy1 at gem1 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x0008bb, model 0x0002, rev. 1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci1 at pci1 dev 5 function 3: Sun Microsystems USB controller (rev. 0x01)
ohci1: interrupting at ivec 26
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Sun Microsystem OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ppb1 at pci0 dev 1 function 0: Sun Microsystems Simba PCI bridge (rev. 0x13)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
esiop0 at pci2 dev 8 function 0: Symbios Logic 53c896 (ultra2-wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at ivec 20
scsibus0 at esiop0: 16 targets, 8 luns per target
esiop1 at pci2 dev 8 function 1: Symbios Logic 53c896 (ultra2-wide scsi)
esiop1: using on-board RAM
esiop1: interrupting at ivec 20
scsibus1 at esiop1: 16 targets, 8 luns per target
pcons at mainbus0 not configured
No counter-timer -- using %tick at 500MHz as system clock.
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <CD-224E, , 1.7A> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST318305LSUN18G, 0340> disk fixed
sd0: 17274 MB, 7508 cyl, 19 head, 248 sec, 512 bytes/sect x 35378533 sectors
sd0: sync (25.00ns offset 31), 16-bit (80.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: <SEAGATE, ST318305LSUN18G, 0340> disk fixed
sd1: 17274 MB, 7508 cyl, 19 head, 248 sec, 512 bytes/sect x 35378533 sectors
sd1: sync (25.00ns offset 31), 16-bit (80.000MB/s) transfers, tagged queueing
root on sd0a dumps on sd0b
root file system type: ffs

dmesg FMV_6667SL5

NetBSD 3.0.3 (GENERIC) #0: Mon Jul  9 15:39:53 PDT 2007
	builds@wb29:/home/builds/ab/netbsd-3-0-3-RELEASE/i386/200707091605Z-obj/home/builds/ab/netbsd-3-0-3-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 126 MB
avail memory = 115 MB
BIOS32 rev. 0 found at 0xfd880
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 664.54 MHz, id 0x683
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82810E Memory Controller Hub (rev. 0x03)
pchb0: random number generator enabled
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
vga1 at pci0 dev 1 function 0: Intel 82810E Graphics Controller (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ppb0 at pci0 dev 30 function 0: Intel 82801AA Hub-PCI Bridge (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
fxp0 at pci1 dev 3 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 5
fxp0: May need receiver lock-up workaround
fxp0: Ethernet address 00:e0:00:03:00:2c
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801AA LPC Interface Bridge (rev. 0x02)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801AA IDE Controller (ICH) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 31 function 2: Intel 82801AA USB Controller (rev. 0x02)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82801AA SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801AA (ICH) AC-97 Audio
auich0: interrupting at irq 9
auich0: ac97: Crystal CS4299 codec; headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
auich0: ac97: ext id 201<AMAP,VRA>
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
auich0: measured ac97 link rate at 47990 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <FUJITSU MPF3102AT>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9736 MB, 19783 cyl, 16 head, 63 sec, 512 bytes/sect x 19941264 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <SAMSUNG CD-ROM  SC-148A, , B400> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0g dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg FMV_6667SL5

NetBSD 3.1.1 (GENERIC) #0: Sun Jul  1 08:48:35 PDT 2007
	builds@wb42:/home/builds/ab/netbsd-3-1-1-RELEASE/i386/200707010939Z-obj/home/builds/ab/netbsd-3-1-1-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 126 MB
avail memory = 115 MB
BIOS32 rev. 0 found at 0xfd880
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 664.54 MHz, id 0x683
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82810E Memory Controller Hub (rev. 0x03)
pchb0: random number generator enabled
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
vga1 at pci0 dev 1 function 0: Intel 82810E Graphics Controller (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ppb0 at pci0 dev 30 function 0: Intel 82801AA Hub-PCI Bridge (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
fxp0 at pci1 dev 3 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 5
fxp0: May need receiver lock-up workaround
fxp0: Ethernet address 00:e0:00:03:00:2c
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801AA LPC Interface Bridge (rev. 0x02)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801AA IDE Controller (ICH) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 31 function 2: Intel 82801AA USB Controller (rev. 0x02)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82801AA SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801AA (ICH) AC-97 Audio
auich0: interrupting at irq 9
auich0: ac97: Crystal CS4299 codec; headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
auich0: ac97: ext id 201<AMAP,VRA>
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
auich0: measured ac97 link rate at 47989 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <FUJITSU MPF3102AT>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9736 MB, 19783 cyl, 16 head, 63 sec, 512 bytes/sect x 19941264 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <SAMSUNG CD-ROM  SC-148A, , B400> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0e dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg HP_ML115_athlon64

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0 (GENERIC) #0: Sat Dec 15 22:25:31 PST 2007
	builds@wb28:/home/builds/ab/netbsd-4-0-RELEASE/amd64/200712160005Z-obj/home/builds/ab/netbsd-4-0-RELEASE/src/sys/arch/amd64/compile/GENERIC
total memory = 511 MB
avail memory = 481 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 Processor 3500+, 2200.13 MHz
cpu0: features: efdbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: efdbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: efdbfbff<FXSR,SSE,SSE2,B27,LONG,3DNOW2,3DNOW>
cpu0: features2: 2001<SSE3>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 512 KB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: AMD Power Management features: 3f<STC,TM,TTP,VID,FID,TS>
cpu0: calibrating local timer
cpu0: apic clock running at 199 MHz
cpu0: 8 page colors
ioapic0 at mainbus0 apid 1 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <HP    ,ML115 G1,10000717>, AslId <FOXC,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
pcppi1: children must have an explicit unit
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
PNP0C04 [Math Coprocessor] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0103 [HPET Timer] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
IPI0001 ACPI Error (nsxfeval-0216): Incorrect return type [Buffer] requested [String] [20060217]
at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C-170): ACPI Power Button
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
pcppi1: attached to attimer1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
NVIDIA nForce MCP55 Memory Controller (RAM memory, revision 0xa2) at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0
pcib0: NVIDIA product 0x0360 (rev. 0xa3)
NVIDIA nForce MCP55 SMBus Controller (SMBus serial bus, revision 0xa3) at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0: NVIDIA nForce MCP55 OHCI USB Controller (rev. 0xa1)
LUB0: Picked IRQ 20 with weight 0
ohci0: interrupting at ioapic0 pin 20 (irq 7)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0 at pci0 dev 2 function 1: NVIDIA nForce MCP55 EHCI USB Controller (rev. 0xa2)
LUB2: Picked IRQ 21 with weight 0
ehci0: interrupting at ioapic0 pin 21 (irq 7)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controller, 10 ports each: ohci0
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
viaide0 at pci0 dev 4 function 0
viaide0: NVIDIA MCP55 IDE Controller (rev. 0xa1)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel ignored (disabled)
viaide1 at pci0 dev 5 function 0
viaide1: NVIDIA MCP55 Serial ATA Controller (rev. 0xa3)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
LSA0: Picked IRQ 22 with weight 0
viaide1: using ioapic0 pin 22 (irq 10) for native-PCI interrupt
atabus1 at viaide1 channel 0
viaide1: secondary channel wired to native-PCI mode
atabus2 at viaide1 channel 1
viaide2 at pci0 dev 5 function 1
viaide2: NVIDIA MCP55 Serial ATA Controller (rev. 0xa3)
viaide2: bus-master DMA support present
viaide2: primary channel wired to native-PCI mode
LSA1: Picked IRQ 23 with weight 0
viaide2: using ioapic0 pin 23 (irq 11) for native-PCI interrupt
atabus3 at viaide2 channel 0
viaide2: secondary channel wired to native-PCI mode
atabus4 at viaide2 channel 1
viaide3 at pci0 dev 5 function 2
viaide3: NVIDIA MCP55 Serial ATA Controller (rev. 0xa3)
viaide3: bus-master DMA support present
viaide3: primary channel wired to native-PCI mode
LSA2: Picked IRQ 20 with weight 1
viaide3: using ioapic0 pin 20 (irq 5) for native-PCI interrupt
atabus5 at viaide3 channel 0
viaide3: secondary channel wired to native-PCI mode
atabus6 at viaide3 channel 1
ppb0 at pci0 dev 6 function 0: NVIDIA nForce MCP55 PCI-PCI Bridge (rev. 0xa2)
pci1 at ppb0 bus 1
pci1: no spaces enabled!
ppb1 at pci0 dev 10 function 0: NVIDIA product 0x0376 (rev. 0xa3)
pci2 at ppb1 bus 2
pci2: no spaces enabled!
ppb2 at pci0 dev 11 function 0: NVIDIA product 0x0374 (rev. 0xa3)
pci3 at ppb2 bus 3
pci3: no spaces enabled!
ppb3 at pci0 dev 12 function 0: NVIDIA product 0x0374 (rev. 0xa3)
pci4 at ppb3 bus 4
pci4: no spaces enabled!
ppb4 at pci0 dev 13 function 0: NVIDIA product 0x0378 (rev. 0xa3)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci5 dev 0 function 0: Matrox product 0x0522 (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ppb5 at pci0 dev 14 function 0: NVIDIA product 0x0375 (rev. 0xa3)
pci6 at ppb5 bus 6
pci6: memory space enabled, rd/line, wr/inv ok
bge0 at pci6 dev 0 function 0: Broadcom BCM5721 Gigabit Ethernet
LNEC: Picked IRQ 16 with weight 0
bge0: interrupting at ioapic0 pin 16 (irq 10)
bge0: ASIC unknown BCM575x family (0x4201), Ethernet address 00:1e:0b:bc:a3:f5
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb6 at pci0 dev 15 function 0: NVIDIA nForce MCP55 PCI-Express 16x Port (rev. 0xa3)
pci7 at ppb6 bus 7
pci7: no spaces enabled!
pchb0 at pci0 dev 24 function 0
pchb0: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb1 at pci0 dev 24 function 1
pchb1: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 2
pchb2: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 3
pchb3: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
ioapic0: enabling
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <TSSTcorp CD-ROM TS-H192C, , B504> cdrom removable
viaide1 port 0: device present, speed: 1.5Gb/s
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd0 at atabus1 drive 0: <FB080C4080>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
uhidev0 at uhub0 port 5 configuration 1 interface 0
uhidev0: ServerEngines SE USB Device, rev 1.10/0.01, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 5 configuration 1 interface 1
uhidev1: ServerEngines SE USB Device, rev 1.10/0.01, addr 2, iclass 3/1
ums0 at uhidev1: 8 buttons and Z dir.
wsmouse1 at ums0 mux 0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg FMV_6667SL5

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0 (GENERIC) #0: Sun Dec 16 00:20:10 PST 2007
	builds@wb34:/home/builds/ab/netbsd-4-0-RELEASE/i386/200712160005Z-obj/home/builds/ab/netbsd-4-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 126 MB
rbus: rbus_min_start set to 0x20000000
avail memory = 114 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd880
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 664.54 MHz, id 0x683
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 8 page colors
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <FUJ   ,M72     ,00000102>, AslId <FUJ ,00000100>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
LNKB: ACPI: Found matching pin for 0.31.INTB at func 3: 9
LNKD: ACPI: Found matching pin for 0.31.INTD at func 2: 11
LNKA: ACPI: Found matching pin for 0.1.INTA at func 0: 10
LNKC: ACPI: Found matching pin for 1.3.INTA at func 0: 5
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
INT0800 [Intel FWH Random Number Generator] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
pcppi1: children must have an explicit unit
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (PNP0F13): aux port
pckbc2: irq 12
PNP0A05 [Generic Container Device] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0400 [Standard LPT printer port] at acpi0 not configured
PNP0700 [PC standard floppy disk controller] at acpi0 not configured
pcppi1: attached to attimer1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82810E Memory Controller Hub (rev. 0x03)
pchb0: random number generator enabled
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
vga1 at pci0 dev 1 function 0: Intel 82810E Graphics Controller (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
ppb0 at pci0 dev 30 function 0: Intel 82801AA Hub-PCI Bridge (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
fxp0 at pci1 dev 3 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 5
fxp0: May need receiver lock-up workaround
fxp0: Ethernet address 00:e0:00:03:00:2c
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801AA LPC Interface Bridge (rev. 0x02)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801AA IDE Controller (ICH) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 31 function 2: Intel 82801AA USB Controller (rev. 0x02)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82801AA SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801AA (ICH) AC-97 Audio
auich0: interrupting at irq 9
auich0: ac97: Crystal CS4299 codec; headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
auich0: ac97: ext id 201<AMAP,VRA>
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
auich0: measured ac97 link rate at 47988 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <FUJITSU MPF3102AT>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9736 MB, 19783 cyl, 16 head, 63 sec, 512 bytes/sect x 19941264 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <SAMSUNG CD-ROM  SC-148A, , B400> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

dmesg HP_lp2000r_P3_1.13G

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0 (NSRG) #0: Wed Apr 30 12:09:37 JST 2008
	fukachan@eidos.fml.org:/usr/src/sys/arch/i386/compile/NSRG
total memory = 511 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 492 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd8e2
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 1133.45 MHz, id 0x6b1
cpu0: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 383fbff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383fbff<FXSR,SSE>
cpu0: "Intel(R) Pentium(R) III CPU family      1133MHz"
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 512 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 16 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: ServerWorks CNB20-HE PCI/AGP bridge (rev. 0x06)
pchb1 at pci0 dev 0 function 1
pchb1: ServerWorks CNB20-HE PCI/AGP bridge (rev. 0x06)
pci1 at pchb1 bus 1
pci1: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ahc1 at pci1 dev 3 function 0: Adaptec 2940 Ultra SCSI adapter
ahc1: interrupting at irq 11
ahc1: aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
scsibus0 at ahc1: 16 targets, 8 luns per target
esiop0 at pci1 dev 5 function 0: Symbios Logic 53c1010-33 (ultra3-wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at irq 5
scsibus1 at esiop0: 16 targets, 8 luns per target
esiop1 at pci1 dev 5 function 1: Symbios Logic 53c1010-33 (ultra3-wide scsi)
esiop1: using on-board RAM
esiop1: interrupting at irq 9
scsibus2 at esiop1: 16 targets, 8 luns per target
fxp0 at pci0 dev 2 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 11
fxp0: Ethernet address 00:30:6e:12:f1:9d
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vga1 at pci0 dev 7 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
fxp1 at pci0 dev 8 function 0: i82559 Ethernet, rev 8
fxp1: interrupting at irq 10
fxp1: Ethernet address 00:30:6e:12:f1:9e
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 15 function 0
pcib0: ServerWorks OSB4 southbridge (rev. 0x50)
rccide0 at pci0 dev 15 function 1
rccide0: ServerWorks OSB4 IDE Controller (rev. 0x00)
rccide0: bus-master DMA support present
rccide0: primary channel configured to compatibility mode
rccide0: primary channel interrupting at irq 14
atabus0 at rccide0 channel 0
rccide0: secondary channel configured to compatibility mode
rccide0: secondary channel interrupting at irq 15
atabus1 at rccide0 channel 1
ohci0 at pci0 dev 15 function 2: ServerWorks OSB4/CSB5 USB Host Controller (rev. 0x04)
ohci0: interrupting at irq 12
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
pcppi0: children must have an explicit unit
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcppi0: attached to attimer0
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
scsibus2: waiting 2 seconds for devices to settle...
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <LTN486S, , YKS4> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(rccide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (using DMA)
ses0 at scsibus0 target 11 lun 0: <SDR, GEM318, 0> processor fixed
ses0: SAF-TE Compliant Device
ses0: async, 8-bit transfers
sd0 at scsibus1 target 0 lun 0: <SEAGATE, ST373207LC, 0003> disk fixed
sd0: 70007 MB, 90774 cyl, 2 head, 789 sec, 512 bytes/sect x 143374744 sectors
sd0: sync (12.50ns offset 62), 16-bit (160.000MB/s) transfers, tagged queueing
sd1 at scsibus1 target 1 lun 0: <SEAGATE, ST373207LC, 0003> disk fixed
sd1: 70007 MB, 90774 cyl, 2 head, 789 sec, 512 bytes/sect x 143374744 sectors
sd1: sync (12.50ns offset 62), 16-bit (160.000MB/s) transfers, tagged queueing
sd2 at scsibus1 target 2 lun 0: <SEAGATE, ST373207LC, 0003> disk fixed
sd2: 70007 MB, 90774 cyl, 2 head, 789 sec, 512 bytes/sect x 143374744 sectors
sd2: sync (12.50ns offset 62), 16-bit (160.000MB/s) transfers, tagged queueing
ses1 at scsibus1 target 15 lun 0: <SDR, GEM318, 0> processor fixed
ses1: SAF-TE Compliant Device
ses1: async, 8-bit transfers
raid0: RAID Level 1
raid0: Components: /dev/sd0a /dev/sd1a
raid0: Total Sectors: 70699904 (34521 MB)
boot device: raid0
root on raid0a dumps on raid0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg JCS_ISP2150_P3_700x1

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0 (GENERIC) #0: Sun Dec 16 00:20:10 PST 2007
	builds@wb34:/home/builds/ab/netbsd-4-0-RELEASE/i386/200712160005Z-obj/home/builds/ab/netbsd-4-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 127 MB
rbus: rbus_min_start set to 0x20000000
avail memory = 115 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd7e3
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 696.45 MHz, id 0x681
cpu0: features 387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 387fbff<PGE,MCA,CMOV,PAT,PSE36,PN,MMX>
cpu0: features 387fbff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: serial number 0000-0681-0001-8881-4B5F-8B40
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443GX Host Bridge/Controller (rev. 0x00)
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82443GX AGP Interface (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ppb1 at pci1 dev 15 function 0: Digital Equipment product 0x0023 (rev. 0x06)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ppb2 at pci2 dev 4 function 0: Texas Instruments product 0xac21 (rev. 0x01)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
ahc1 at pci3 dev 5 function 0: Adaptec 2940 Ultra2 SCSI adapter
ahc1: interrupting at irq 10
ahc1: aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus0 at ahc1: 16 targets, 8 luns per target
ahc2 at pci0 dev 12 function 0: Adaptec aic7896/97 Ultra2 SCSI adapter
ahc2: interrupting at irq 11
ahc2: aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus1 at ahc2: 16 targets, 8 luns per target
ahc3 at pci0 dev 12 function 1: Adaptec aic7896/97 Ultra2 SCSI adapter
ahc3: interrupting at irq 11
ahc3: aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/253 SCBs
scsibus2 at ahc3: 16 targets, 8 luns per target
fxp0 at pci0 dev 14 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 10
fxp0: May need receiver lock-up workaround
fxp0: Ethernet address 00:90:27:6a:db:1f
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
piixpcib0 at pci0 dev 18 function 0
piixpcib0: Intel 82371AB (PIIX4) PCI-ISA Bridge (rev. 0x02)
piixpcib0: SpeedStep SMI enabled
piixide0 at pci0 dev 18 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 18 function 2: Intel 82371AB (PIIX4) USB Host Controller (rev. 0x01)
uhci0: interrupting at irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piixpm0 at pci0 dev 18 function 3: Power Management Controller
timecounter: Timecounter "piixpm0" frequency 3579545 Hz quality 900
piixpm0 24-bit timer
piixpm0: interrupting at SMI
iic0 at piixpm0: I2C bus
vga1 at pci0 dev 20 function 0: Cirrus Logic CL-GD5480 (rev. 0x23)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
isa0 at piixpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
pcppi0: children must have an explicit unit
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcppi0: attached to attimer0
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
scsibus2: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 2 lun 0: <FUJITSU, MAH3182MC, 0114> disk fixed
sd0: 17432 MB, 17546 cyl, 4 head, 508 sec, 512 bytes/sect x 35701260 sectors
sd0: sync (50.00ns offset 127), 16-bit (40.000MB/s) transfers, tagged queueing
ses0 at scsibus0 target 6 lun 0: <ESG-SHV, SCA HSBP M10, 0.03> processor fixed
ses0: SAF-TE Compliant Device
ses0: async, 8-bit transfers
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <CD-224E, , 1.5A> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg JCS_ISP2150_P3_700x2_SATA

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0 (NSRG.MP) #1: Thu May  8 07:02:04 JST 2008
	fukachan@henrietta.nsrg.fml.org:/usr/src/sys/arch/i386/compile/NSRG.MP
total memory = 767 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 743 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd7e3
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (INTEL    Lancewood   )
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: Intel Pentium III (686-class), 696.45 MHz, id 0x681
cpu0: features 387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 387fbff<PGE,MCA,CMOV,PAT,PSE36,PN,MMX>
cpu0: features 387fbff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: serial number 0000-0681-0001-8881-4B5F-8B40
cpu0: calibrating local timer
cpu0: apic clock running at 99 MHz
cpu0: 8 page colors
cpu1 at mainbus0: apid 0 (application processor)
cpu1: starting
cpu1: Intel Pentium III (686-class), 696.41 MHz, id 0x681
cpu1: features 387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features 387fbff<PGE,MCA,CMOV,PAT,PSE36,PN,MMX>
cpu1: features 387fbff<FXSR,SSE>
cpu1: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu1: L2 cache 256 KB 32B/line 8-way
cpu1: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu1: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu1: serial number 0000-0681-0003-7344-F281-8223
mpbios: bus 0 is type PCI   
mpbios: bus 1 is type PCI   
mpbios: bus 2 is type PCI   
mpbios: bus 3 is type PCI   
mpbios: bus 4 is type ISA   
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443GX Host Bridge/Controller (rev. 0x00)
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82443GX AGP Interface (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ppb1 at pci1 dev 15 function 0: Digital Equipment product 0x0023 (rev. 0x06)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ppb2 at pci2 dev 4 function 0: Texas Instruments product 0xac21 (rev. 0x01)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
satalink0 at pci3 dev 5 function 0
satalink0: Silicon Image SATALink 3114 (rev. 0x02)
satalink0: 33MHz PCI bus
satalink0: bus-master DMA support present
satalink0: using ioapic0 pin 21 (irq 10) for native-PCI interrupt
atabus0 at satalink0 channel 0
atabus1 at satalink0 channel 1
atabus2 at satalink0 channel 2
atabus3 at satalink0 channel 3
ahc1 at pci0 dev 12 function 0: Adaptec aic7896/97 Ultra2 SCSI adapter
ahc1: interrupting at ioapic0 pin 19 (irq 11)
ahc1: aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus0 at ahc1: 16 targets, 8 luns per target
ahc2 at pci0 dev 12 function 1: Adaptec aic7896/97 Ultra2 SCSI adapter
ahc2: interrupting at ioapic0 pin 19 (irq 11)
ahc2: aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/253 SCBs
scsibus1 at ahc2: 16 targets, 8 luns per target
fxp0 at pci0 dev 14 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at ioapic0 pin 21 (irq 10)
fxp0: May need receiver lock-up workaround
fxp0: Ethernet address 00:90:27:6a:db:1f
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
piixpcib0 at pci0 dev 18 function 0
piixpcib0: Intel 82371AB (PIIX4) PCI-ISA Bridge (rev. 0x02)
piixpcib0: SpeedStep SMI enabled
piixide0 at pci0 dev 18 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus4 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus5 at piixide0 channel 1
uhci0 at pci0 dev 18 function 2: Intel 82371AB (PIIX4) USB Host Controller (rev. 0x01)
uhci0: interrupting at ioapic0 pin 21 (irq 10)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piixpm0 at pci0 dev 18 function 3: Power Management Controller
timecounter: Timecounter "piixpm0" frequency 3579545 Hz quality 900
piixpm0 24-bit timer
piixpm0: interrupting at SMI
iic0 at piixpm0: I2C bus
vga1 at pci0 dev 20 function 0: Cirrus Logic CL-GD5480 (rev. 0x23)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
isa0 at piixpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
pcppi0: children must have an explicit unit
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcppi0: attached to attimer0
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
satalink0: port 0: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0: <Hitachi HDP725050GLA360>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: 32-bit data port
scsibus0: waiting 2 seconds for devices to settle...
wd0: drive supports PIO mode 4scsibus1: waiting 2 seconds for devices to settle...
, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(satalink0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus4: 2 targets
cd0 at atapibus0 drive 0: <CD-224E, , 1.5A> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
cpu1: CPU 0 running
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg JCS_ISP2150_P3_700x2

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0 (NSRG.MP) #1: Thu May  8 07:02:04 JST 2008
	fukachan@henrietta.nsrg.fml.org:/usr/src/sys/arch/i386/compile/NSRG.MP
total memory = 127 MB
rbus: rbus_min_start set to 0x20000000
avail memory = 115 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd7e3
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (INTEL    Lancewood   )
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: Intel Pentium III (686-class), 696.45 MHz, id 0x681
cpu0: features 387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 387fbff<PGE,MCA,CMOV,PAT,PSE36,PN,MMX>
cpu0: features 387fbff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: serial number 0000-0681-0001-8881-4B5F-8B40
cpu0: calibrating local timer
cpu0: apic clock running at 99 MHz
cpu0: 8 page colors
cpu1 at mainbus0: apid 0 (application processor)
cpu1: starting
cpu1: Intel Pentium III (686-class), 696.41 MHz, id 0x681
cpu1: features 387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features 387fbff<PGE,MCA,CMOV,PAT,PSE36,PN,MMX>
cpu1: features 387fbff<FXSR,SSE>
cpu1: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu1: L2 cache 256 KB 32B/line 8-way
cpu1: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu1: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu1: serial number 0000-0681-0003-7344-F281-8223
mpbios: bus 0 is type PCI   
mpbios: bus 1 is type PCI   
mpbios: bus 2 is type PCI   
mpbios: bus 3 is type PCI   
mpbios: bus 4 is type ISA   
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443GX Host Bridge/Controller (rev. 0x00)
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82443GX AGP Interface (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ppb1 at pci1 dev 15 function 0: Digital Equipment product 0x0023 (rev. 0x06)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ppb2 at pci2 dev 4 function 0: Texas Instruments product 0xac21 (rev. 0x01)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
ahc1 at pci3 dev 5 function 0: Adaptec 2940 Ultra2 SCSI adapter
ahc1: interrupting at ioapic0 pin 21 (irq 10)
ahc1: aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus0 at ahc1: 16 targets, 8 luns per target
ahc2 at pci0 dev 12 function 0: Adaptec aic7896/97 Ultra2 SCSI adapter
ahc2: interrupting at ioapic0 pin 19 (irq 11)
ahc2: aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus1 at ahc2: 16 targets, 8 luns per target
ahc3 at pci0 dev 12 function 1: Adaptec aic7896/97 Ultra2 SCSI adapter
ahc3: interrupting at ioapic0 pin 19 (irq 11)
ahc3: aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/253 SCBs
scsibus2 at ahc3: 16 targets, 8 luns per target
fxp0 at pci0 dev 14 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at ioapic0 pin 21 (irq 10)
fxp0: May need receiver lock-up workaround
fxp0: Ethernet address 00:90:27:6a:db:1f
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
piixpcib0 at pci0 dev 18 function 0
piixpcib0: Intel 82371AB (PIIX4) PCI-ISA Bridge (rev. 0x02)
piixpcib0: SpeedStep SMI enabled
piixide0 at pci0 dev 18 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 18 function 2: Intel 82371AB (PIIX4) USB Host Controller (rev. 0x01)
uhci0: interrupting at ioapic0 pin 21 (irq 10)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piixpm0 at pci0 dev 18 function 3: Power Management Controller
timecounter: Timecounter "piixpm0" frequency 3579545 Hz quality 900
piixpm0 24-bit timer
piixpm0: interrupting at SMI
iic0 at piixpm0: I2C bus
vga1 at pci0 dev 20 function 0: Cirrus Logic CL-GD5480 (rev. 0x23)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
isa0 at piixpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
pcppi0: children must have an explicit unit
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcppi0: attached to attimer0
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
scsibus2: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 2 lun 0: <FUJITSU, MAH3182MC, 0114> disk fixed
sd0: 17432 MB, 17546 cyl, 4 head, 508 sec, 512 bytes/sect x 35701260 sectors
sd0: sync (50.00ns offset 127), 16-bit (40.000MB/s) transfers, tagged queueing
ses0 at scsibus0 target 6 lun 0: <ESG-SHV, SCA HSBP M10, 0.03> processor fixed
ses0: SAF-TE Compliant Device
ses0: async, 8-bit transfers
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <CD-224E, , 1.5A> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
cpu1: CPU 0 running
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg JCS_Vintage_P6_3G

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0 (GENERIC) #0: Sun Dec 16 00:20:10 PST 2007
	builds@wb34:/home/builds/ab/netbsd-4-0-RELEASE/i386/200712160005Z-obj/home/builds/ab/netbsd-4-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 510 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 491 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xf0010
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel (686-class), 2992.67 MHz, id 0xf41
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 441d<SSE3,MONITOR,DS-CPL,CID,xTPR>
cpu0: "Intel(R) Pentium(R) 4 CPU 3.00GHz"
cpu0: I-cache 12K uOp cache 8-way
cpu0: L2 cache 1 MB 64B/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: using thermal monitor 1
cpu0: calibrating local timer
cpu0: apic clock running at 199 MHz
cpu0: 32 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: not started
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <INTEL ,S875PWP3,20041105>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (PNP0F03): aux port
pckbc2: irq 12
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
pcppi1: children must have an explicit unit
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
PNP0700 [PC standard floppy disk controller] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0400 [Standard LPT printer port] at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
INT0800 [Intel FWH Random Number Generator] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
acpibut0 at acpi0 (PNP0C0E-29): ACPI Sleep Button
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi1: attached to attimer1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82875P Host (rev. 0x02)
pchb0: random number generator enabled
agp0 at pchb0: aperture at 0xf4000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82875P AGP (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Matrox MGA G550 AGP (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
ppb1 at pci0 dev 3 function 0: Intel 82875P PCI-CSA Bridge (rev. 0x02)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
wm0 at pci2 dev 1 function 0: Intel i82547EI 1000BASE-T Ethernet, rev. 0
wm0: interrupting at ioapic0 pin 18 (irq 10)
wm0: Communication Streaming Architecture
wm0: using 82547 Tx FIFO stall work-around
wm0: 65536 word (16 address bits) SPI EEPROM
wm0: Ethernet address 00:13:20:30:6c:3f
igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: Intel 82801EB/ER USB UHCI Controller (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801EB/ER USB UHCI Controller (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19 (irq 5)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801EB/ER USB UHCI Controller (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18 (irq 10)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 82801EB/ER USB UHCI Controller (rev. 0x02)
uhci3: interrupting at ioapic0 pin 16 (irq 11)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801EB/ER USB EHCI Controller (rev. 0x02)
ehci0: interrupting at ioapic0 pin 23 (irq 9)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb2 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xc2)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
ATI Technologies Rage XL (VGA display, revision 0x27) at pci3 dev 6 function 0 not configured
fxp0 at pci3 dev 8 function 0: Intel PRO/100 VM Network Controller with 82562ET/EZ PHY, rev 1
fxp0: interrupting at ioapic0 pin 20 (irq 10)
fxp0: Ethernet address 00:13:20:30:6c:3d
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801EB LPC Interface Bridge (rev. 0x02)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801EB IDE Controller (ICH5) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at piixide0 channel 1
piixide1 at pci0 dev 31 function 2
piixide1: Intel 82801EB Serial ATA Controller (rev. 0x02)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 18 (irq 10) for native-PCI interrupt
atabus2 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus3 at piixide1 channel 1
Intel 82801EB/ER SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <Maxtor 6Y120P0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 114 GB, 238216 cyl, 16 head, 63 sec, 512 bytes/sect x 240121728 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1 at atabus0 drive 1: <Maxtor 6Y120P0>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 114 GB, 238216 cyl, 16 head, 63 sec, 512 bytes/sect x 240121728 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd1(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 1: <HL-DT-ST DVDRAM GSA-4163B, K3351RF5416, A102> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
raid0: RAID Level 1
raid0: Components: /dev/wd0a /dev/wd1a
raid0: Total Sectors: 20480384 (10000 MB)
boot device: raid0
root on raid0a dumps on raid0b
root file system type: ffs
raid0: Device already configured!
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg NetCache_C1105

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0 (GENERIC) #0: Sun Dec 16 00:20:10 PST 2007
	builds@wb34:/home/builds/ab/netbsd-4-0-RELEASE/i386/200712160005Z-obj/home/builds/ab/netbsd-4-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 511 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 492 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfda74
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Celeron (Mendocino) (686-class), 434.34 MHz, id 0x665
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 183f9ff<FXSR>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 128 KB 32B/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 8 page colors
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <INTEL ,TR440BXA,20000831>, AslId <AMI ,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
LNKD: ACPI: Found matching pin for 0.7.INTD at func 2: 10
LNKA: ACPI: Found matching pin for 0.14.INTA at func 0: 11
LNKB: ACPI: Found matching pin for 0.12.INTA at func 0: 5
LNKB: ACPI: Found matching pin for 0.13.INTA at func 0: 5
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
pcppi1: children must have an explicit unit
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
PNP0700 [PC standard floppy disk controller] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
acpibut0 at acpi0 (PNP0C0E): ACPI Sleep Button
pcppi1: attached to attimer1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (AGP disabled) (rev. 0x03)
piixpcib0 at pci0 dev 7 function 0
piixpcib0: Intel 82371AB (PIIX4) PCI-ISA Bridge (rev. 0x02)
piixpcib0: SpeedStep SMI enabled
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel ignored (disabled)
uhci0 at pci0 dev 7 function 2: Intel 82371AB (PIIX4) USB Host Controller (rev. 0x01)
uhci0: interrupting at irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piixpm0 at pci0 dev 7 function 3: Power Management Controller
timecounter: Timecounter "piixpm0" frequency 3579545 Hz quality 900
piixpm0 24-bit timer
piixpm0: polling
iic0 at piixpm0: I2C bus
fxp0 at pci0 dev 12 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 5
fxp0: Ethernet address 00:03:47:da:ca:be
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1 at pci0 dev 13 function 0: i82559 Ethernet, rev 8
fxp1: interrupting at irq 5
fxp1: Ethernet address 00:03:47:da:ca:bf
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vga1 at pci0 dev 14 function 0: S3 Trio64V2/DX (rev. 0x14)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
isa0 at piixpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <FUJITSU MPG3102AT E>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9773 MB, 19857 cyl, 16 head, 63 sec, 512 bytes/sect x 20015856 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg ThinkPad_560

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0 (GENERIC) #0: Sun Dec 16 00:20:10 PST 2007
	builds@wb34:/home/builds/ab/netbsd-4-0-RELEASE/i386/200712160005Z-obj/home/builds/ab/netbsd-4-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 40572 KB
rbus: rbus_min_start set to 0x20000000
avail memory = 29636 KB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd880
mainbus0 (root)
ACPI Error (tbxfroot-0775): No valid RSDP was found [20060217]
ACPI Exception (tbxfroot-0531): AE_NOT_FOUND, RSDP structure not found - Flags=8 [20060217]
ACPI Exception (tbxface-0162): AE_NO_ACPI_TABLES, Could not get the RSDP [20060217]
ACPI Exception (tbxface-0211): AE_NO_ACPI_TABLES, Could not load tables [20060217]
ACPI: unable to load tables: AE_NO_ACPI_TABLES
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium (P54C) (586-class), 132.96 MHz, id 0x52c
cpu0: features 1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82437MX (MTSC) Mobile System Controller (rev. 0x02)
pcib0 at pci0 dev 1 function 0
pcib0: Intel 82371MX (MPIIX) Mobile PCI I/O IDE Xcelerator (rev. 0x02)
vga1 at pci0 dev 3 function 0: Trident Microsystems TGUI 9660 (rev. 0xd3)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcic0 at pci0 dev 19 function 0: Cirrus Logic PD6729 PCMCIA controller
pcic0: controller 0 (Cirrus PD6710/2X) has sockets A and B
pcic0: controller 1 (Unknown controller) has no sockets
isa0 at pcib0
lpt2 at isa0 port 0x3bc-0x3bf irq : polled
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43: AT Timer
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atabus0 at wdc0 channel 0
sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.01
audio0 at sb0: half duplex, mmap, independent
midi0 at sb0: SB MIDI UART (CPU-intensive output)
opl0 at sb0: model OPL3
midi1 at opl0: SB Yamaha OPL3 (CPU-intensive output)
pcppi0 at isa0 port 0x61
pcppi0: children must have an explicit unit
midi2 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcppi0: attached to attimer0
isapnp0: no ISA Plug 'n Play devices found
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
pcic0: using irq 3 for socket events
Kernelized RAIDframe activated
ep0 at pcmcia0 function 0: <3Com Corporation, 3C589, TP/BNC LAN Card Ver. 2a, 000002>
pcic0: port 0x400-0x40f
pcmcia0: card irq 7
ep0: address 00:a0:24:a7:7b:57, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep0: 10baseT, 10base5, 10base2 (default 10baseT)
wd0 at atabus0 drive 0: <IBM-DSOA-21080>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 1033 MB, 2100 cyl, 16 head, 63 sec, 512 bytes/sect x 2116800 sectors
wd0: drive supports PIO mode 4, DMA mode 2
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
pcmcia0: card irq 7
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg ThinkPad_T42

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0 (GENERIC) #0: Sun Dec 16 00:20:10 PST 2007
	builds@wb34:/home/builds/ab/netbsd-4-0-RELEASE/i386/200712160005Z-obj/home/builds/ab/netbsd-4-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 1022 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 995 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd750
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium M (Banias) (686-class), 1495.21 MHz, id 0x695
cpu0: features a7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR>
cpu0: features a7e9f9bf<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features a7e9f9bf<FXSR,SSE,SSE2,TM,SBF>
cpu0: features2 180<EST,TM2>
cpu0: "Intel(R) Pentium(R) M processor 1500MHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: using thermal monitor 2
cpu0: Enhanced SpeedStep (1484 mV) 1500 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 1500 1400 1200 1000 800 600
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <IBM   ,TP-1R   ,00003210>, AslId < LTP,00000000>
acpi0: found ECDT, GPE 28
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
LNKA: ACPI: Found matching pin for 0.29.INTA at func 0: 11
LNKD: ACPI: Found matching pin for 0.29.INTB at func 1: 11
LNKC: ACPI: Found matching pin for 0.29.INTC at func 2: 11
LNKH: ACPI: Found matching pin for 0.29.INTD at func 7: 11
LNKC: ACPI: Found matching pin for 0.31.INTA at func 1: 255
LNKB: ACPI: Found matching pin for 0.31.INTB at func 3: 11
LNKA: ACPI: Found matching pin for 1.0.INTA at func 0: 11
LNKA: ACPI: Found matching pin for 2.0.INTA at func 0: 11
LNKB: ACPI: Found matching pin for 2.0.INTB at func 1: 11
LNKA: ACPI: Found matching pin for 2.1.INTA at func 0: 11
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PNP0C0E): ACPI Sleep Button
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
PNP0200 [AT DMA Controller] at acpi0 not configured
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
pcppi1: children must have an explicit unit
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (IBM0057): aux port
pckbc2: irq 12
PNP0700 [PC standard floppy disk controller] at acpi0 not configured
acpiec0 at acpi0 (PNP0C09-0): ACPI Embedded Controller
acpiec0: io 0x62,0x66
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
acpibat0 at acpi0 (PNP0C0A-0): ACPI Battery (Control Method)
acpiacad0 at acpi0 (ACPI0003-0): ACPI AC Adapter
IBM0068 at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: passive cooling mode only
acpitz0: critical 93.0C passive 48.0C
pcppi1: attached to attimer1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82855PM MCH Host Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: Intel 82855PM Host-AGP Bridge (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility M7 LW (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
uhci0 at pci0 dev 29 function 0: Intel 82801DB USB UHCI Controller (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801DB USB UHCI Controller (rev. 0x01)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801DB USB UHCI Controller (rev. 0x01)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801DB USB EHCI Controller (rev. 0x01)
ehci0: interrupting at irq 11
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x81)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
cbb0 at pci2 dev 0 function 0: Texas Instruments PCI4520 PCI-CardBus Bridge w/ IEEE 1394 Host Controller (rev. 0x01)
cbb1 at pci2 dev 0 function 1: Texas Instruments PCI4520 PCI-CardBus Bridge w/ IEEE 1394 Host Controller (rev. 0x01)
wm0 at pci2 dev 1 function 0: Intel i82540EP 1000BASE-T Ethernet, rev. 3
wm0: interrupting at irq 11
wm0: 32-bit 33MHz PCI bus
wm0: 64 word (6 address bits) MicroWire EEPROM
wm0: Ethernet address 00:0d:60:74:89:00
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 4
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 6
pcmcia1 at cardslot1
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801DB ISA Bridge (rev. 0x01)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
Intel 82801DB SMBus Controller (SMBus serial bus, revision 0x01) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
auich0: interrupting at irq 11
auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo
auich0: ac97: ext id 601<AC97_22,AMAP,VRA>
Intel 82801DB AC97 Modem Controller (modem communications, revision 0x01) at pci0 dev 31 function 6 not configured
isa0 at pcib0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
WARNING: Callback scheduled before sysmon task queue thread present.
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
auich0: measured ac97 link rate at 48001 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <HTS548040M9AT00>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ-812, , K103> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg NEC_110Ge_Xeon3040

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0.1 (GENERIC) #0: Tue Oct  7 22:58:48 PDT 2008
	builds@wb30:/home/builds/ab/netbsd-4-0-1-RELEASE/i386/200810080053Z-obj/home/builds/ab/netbsd-4-0-1-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 2046 MB
rbus: rbus_min_start set to 0x80000000
avail memory = 2000 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd5ad
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Core 2 (Merom) (686-class), 1866.84 MHz, id 0x6f2
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,xTPR>
cpu0: "Intel(R) Xeon(R) CPU            3040  @ 1.86GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: L2 cache 2 MB 64B/line 8-way
cpu0: using thermal monitor 1
cpu0: Enhanced SpeedStep disabled by BIOS
cpu0: calibrating local timer
cpu0: apic clock running at 266 MHz
cpu0: 64 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: not started
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <PTLTD ,	 XSDT  ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
pcppi1: children must have an explicit unit
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43,0x50-0x53 irq 0
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (PNP0F13): aux port
pckbc2: irq 12
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
INT0800 [Intel FWH Random Number Generator] at acpi0 not configured
PNP0A05 [Generic Container Device] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0400 [Standard LPT printer port] at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
pcppi1: attached to attimer1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x2778 (rev. 0xc0)
ppb0 at pci0 dev 1 function 0: Intel product 0x2779 (rev. 0xc0)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1 (rev. 0x01)
pci2 at ppb1 bus 2
pci2: no spaces enabled!
ppb2 at pci0 dev 28 function 4: Intel 82801GB/GR PCI Express Port #5 (rev. 0x01)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci3 dev 0 function 0: Intel i82573L Gigabit Ethernet, rev. 0
wm0: interrupting at ioapic0 pin 16 (irq 10)
wm0: PCI-Express bus
wm0: 256 word (8 address bits) SPI EEPROM
wm0: Ethernet address 00:1d:7d:74:07:10
makphy0 at wm0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb3 at pci0 dev 28 function 5: Intel 82801GB/GR PCI Express Port #6 (rev. 0x01)
pci4 at ppb3 bus 4
pci4: no spaces enabled!
uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller (rev. 0x01)
uhci0: interrupting at ioapic0 pin 23 (irq 5)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller (rev. 0x01)
uhci1: interrupting at ioapic0 pin 19 (irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller (rev. 0x01)
uhci2: interrupting at ioapic0 pin 18 (irq 11)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller (rev. 0x01)
uhci3: interrupting at ioapic0 pin 16 (irq 10)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller (rev. 0x01)
ehci0: interrupting at ioapic0 pin 23 (irq 5)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb4 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xe1)
pci5 at ppb4 bus 10
pci5: i/o space, memory space enabled
vga1 at pci5 dev 3 function 0: unknown vendor 0x18ca product 0x0020 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801GB/GR LPC Interface Bridge (rev. 0x01)
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801GB/GR Serial ATA/Raid Controller (ICH7) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at piixide0 channel 1
Intel 82801GB/GR SMBus Controller (SMBus serial bus, revision 0x01) at pci0 dev 31 function 3 not configured
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <Hitachi HDP725050GLA360>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TSSTcorpDVD-ROM TS-H352C, , NE02> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg ASUS_EeePC_2GS_Transcend8G

NetBSD 5.0_BETA (GENERIC) #0: Thu Dec 18 13:33:50 UTC 2008
	builds@b6.netbsd.org:/home/builds/ab/netbsd-5/i386/200812180000Z-obj/home/builds/ab/netbsd-5/src/sys/arch/i386/compile/GENERIC
total memory = 503 MB
avail memory = 482 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
ASUSTeK Computer INC. 700 (0129)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 571MHz, id 0x6d8
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <A M I ,OEMRSDT ,11000719>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pckbc1 at acpi0 (PS2K, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN0A00): aux port
pckbc2: irq 12
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
acpiec0 at acpi0 (EC0, PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery (Control Method)
acpibat0: battery info: ASUS, LION, 700  
acpiacad0 at acpi0 (AC0, ACPI0003): ACPI AC Adapter
asus0 at acpi0 (ATKD, ASUS010-16843008)
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpibut1 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
acpitz0 at acpi0 (TZ00): critical 90.0C, passive cooling
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.3
pms0: Palm detect, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2590 (rev. 0x04)
pchb0: returns constant 0xff stream, RNG disabled.
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2592 (rev. 0x04)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
vendor 0x8086 product 0x2792 (miscellaneous display, revision 0x04) at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 16
azalia0: host: 0x8086/0x2668 (rev. 4), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x2660 (rev. 0x04)
pci1 at ppb0 bus 4
pci1: no spaces enabled!
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2662 (rev. 0x04)
pci2 at ppb1 bus 3
pci2: memory space enabled, rd/line, wr/inv ok
lii0 at pci2 dev 0 function 0: Attansic/Atheros L2 Fast Ethernet
lii0: Ethernet address 00:1e:8c:c1:25:b8
lii0: interrupting at ioapic0 pin 17
ukphy0 at lii0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x00c82e, model 0x0002, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x2664 (rev. 0x04)
pci3 at ppb2 bus 1
pci3: memory space enabled, rd/line, wr/inv ok
ath0 at pci3 dev 0 function 0
ath0: interrupting at ioapic0 pin 18
ath0: unable to attach hardware; HAL status 13
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2658 (rev. 0x04)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2659 (rev. 0x04)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x265a (rev. 0x04)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x265b (rev. 0x04)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x265c (rev. 0x04)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xd4)
pci4 at ppb3 bus 5
pci4: no spaces enabled!
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2641 (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801FBM Serial ATA Controller (ICH6) (rev. 0x04)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x266a (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
azalia0: codec[0]: Realtek ALC662-GR (rev. 1.1), HDA rev. 1.0
audio0 at azalia0: full duplex, independent
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: vendor 0x15ca USB Optical Mouse, rev 2.00/5.12, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
umass0 at uhub4 port 5 configuration 1 interface 0
umass0: ENE UB6225, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <USB2.0, CardReader SD0, 0100> disk removable
wd0 at atabus1 drive 0: <SILICONMOTION SM223AC>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 1907 MB, 3876 cyl, 16 head, 63 sec, 512 bytes/sect x 3907008 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
sd0: fabricating a geometry
sd0: 7646 MB, 7646 cyl, 64 head, 32 sec, 512 bytes/sect x 15659008 sectors
sd0: fabricating a geometry
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
uhidev1 at uhub1 port 2 configuration 1 interface 0
uhidev1: Topre Corporation RealForce Compact, rev 1.10/1.02, addr 3, iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg FLOLA_330W_DG7_CeleronD_2.8G

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0 (GENERIC) #0: Sun Apr 26 18:50:08 UTC 2009
	builds@b6.netbsd.org:/home/builds/ab/netbsd-5-0-RELEASE/i386/200904260229Z-obj/home/builds/ab/netbsd-5-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 503 MB
avail memory = 483 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
HITACHI              FLORA 330 DG7        (N/A                 )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2800MHz, id 0xf41
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <HTC   ,HTCACPI ,42302e31>, AslId <AWRD,01010101>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
FWH (INT0800) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
FDC0 (PNP0700) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
LPT1 (PNP0400) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2570 (rev. 0x02)
agp0 at pchb0: detected 8060k stolen memory
agp0: aperture at 0xf0000000, size 0x8000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2572 (rev. 0x02)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x24d2 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x24d4 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x24d7 (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x24de (rev. 0x02)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x24dd (rev. 0x02)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb0 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xc2)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
re0 at pci1 dev 5 function 0: RealTek 8169/8110 Gigabit Ethernet (rev. 0x10)
re0: interrupting at ioapic0 pin 21
re0: Ethernet address 00:0f:ea:0e:e0:9c
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x24d0 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801EB IDE Controller (ICH5) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x24d3 (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 17
iic0 at ichsmb0: I2C bus
auich0 at pci0 dev 31 function 5: i82801EB (ICH5) AC-97 Audio
auich0: interrupting at ioapic0 pin 17
auich0: ac97: Avance Logic ALC655 codec; no 3D stereo
auich0: ac97: ext id 9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2800226520 Hz quality 3000
audio0 at auich0: full duplex, independent
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <SAMSUNG CD-ROM  SC-148A, , B402> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0 at atabus0 drive 0: <HDS728040PLAT20>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 38146 MB, 77505 cyl, 16 head, 63 sec, 512 bytes/sect x 78125040 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
cd0(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
umass0 at uhub4 port 5 configuration 1 interface 0
umass0: BUFFALO USB Flash Disk, rev 2.00/40.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <BUFFALO, USB Flash Disk, 4000> disk removable
sd0: 1912 MB, 3936 cyl, 16 head, 63 sec, 512 bytes/sect x 3915776 sectors
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg FMV_C8210_Celeron_M_1.4G

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0 (GENERIC) #0: Sun Apr 26 18:50:08 UTC 2009
	builds@b6.netbsd.org:/home/builds/ab/netbsd-5-0-RELEASE/i386/200904260229Z-obj/home/builds/ab/netbsd-5-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 1270 MB
avail memory = 1236 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
FUJITSU FMVNC2GC3 ( )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1396MHz, id 0x6d8
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <FUJ   ,FJNB1A9 ,01050000>, AslId <FUJ ,00000100>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
FJEX (FUJ02B1) at acpi0 not configured
attimer1 at acpi0 (TIME, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (MATH, PNP0C04)
npx1: io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
pckbc1 at acpi0 (KBC, PNP0320): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F13): aux port
pckbc2: irq 12
UAR1 (PNP0501) at acpi0 not configured
LPT (PNP0400) at acpi0 not configured
FDC (PNP0700) at acpi0 not configured
FEXT (FUJ02E3) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (CMB1, PNP0C0A-1): ACPI Battery (Control Method)
acpibat0: battery info: Fujitsu, LION, CP220535 1
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2590 (rev. 0x04)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xc0000000, size 0x10000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2592 (rev. 0x04)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
vendor 0x8086 product 0x2792 (miscellaneous display, revision 0x04) at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 16
azalia0: host: 0x8086/0x2668 (rev. 4), HDA rev. 1.0
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2658 (rev. 0x04)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2659 (rev. 0x04)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x265a (rev. 0x04)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x265c (rev. 0x04)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
ppb0 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xd4)
pci1 at ppb0 bus 6
pci1: i/o space, memory space enabled
cbb0 at pci1 dev 3 function 0: vendor 0x1217 product 0x7213 (rev. 0x20)
cbb1 at pci1 dev 3 function 1: vendor 0x1217 product 0x7213 (rev. 0x20)
bce0 at pci1 dev 4 function 0: Broadcom BCM4401-B0 10/100 Ethernet
bce0: interrupting at ioapic0 pin 20
bmtphy0 at bce0 phy 1: BCM4401 10/100 media interface, rev. 0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bce0: Ethernet address 00:0b:5d:ca:5b:48
cbb0: cacheline 0x0 lattimer 0x40
cbb0: bhlc 0x824000
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
cardbus0 at cardslot0: bus 7
pcmcia0 at cardslot0
cbb1: cacheline 0x0 lattimer 0x40
cbb1: bhlc 0x824000
cbb1: interrupting at ioapic0 pin 16
cardslot1 at cbb1
cardbus1 at cardslot1: bus 8
pcmcia1 at cardslot1
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2641 (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801FB IDE Controller (ICH6) (rev. 0x04)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
piixide1 at pci0 dev 31 function 2
piixide1: Intel 82801FBM Serial ATA Controller (ICH6) (rev. 0x04)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 19 for native-PCI interrupt
atabus1 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus2 at piixide1 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x266a (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
azalia0: codec[0]: Realtek ALC260 (rev. 4.0), HDA rev. 1.0
audio0 at azalia0: full duplex, independent
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <CD-224E-N, , 4.AA> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: vendor 0x15ca USB Optical Mouse, rev 2.00/5.12, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
wd0 at atabus1 drive 0: <HTS424040M9AT00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg FMV_CX630_P4_2.8G

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0 (GENERIC) #0: Sun Apr 26 18:50:08 UTC 2009
	builds@b6.netbsd.org:/home/builds/ab/netbsd-5-0-RELEASE/i386/200904260229Z-obj/home/builds/ab/netbsd-5-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 503 MB
avail memory = 482 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
FUJITSU FMVXD1P01R ( )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2793MHz, id 0xf41
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <FUJ   ,KSG/2   ,10900000>, AslId <FUJ ,00000100>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
npx1 at acpi0 (MATH, PNP0C04)
npx1: io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
attimer1 at acpi0 (TIME, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pckbc1 at acpi0 (KBC, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F13): aux port
pckbc2: irq 12
UAR1 (PNP0501) at acpi0 not configured
LPT (PNP0400) at acpi0 not configured
FDC (PNP0700) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2570 (rev. 0x02)
agp0 at pchb0: detected 8060k stolen memory
agp0: aperture at 0xf0000000, size 0x8000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2572 (rev. 0x02)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
ppb0 at pci0 dev 3 function 0: vendor 0x8086 product 0x2573 (rev. 0x02)
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled
wm0 at pci1 dev 1 function 0: Intel i82547EI 1000BASE-T Ethernet, rev. 0
wm0: interrupting at ioapic0 pin 18
wm0: Communication Streaming Architecture
wm0: using 82547 Tx FIFO stall work-around
wm0: 65536 word (16 address bits) SPI EEPROM
wm0: Ethernet address 00:0f:ea:ca:f6:78
igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x24d2 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x24d4 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x24d7 (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x24dd (rev. 0x02)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
ppb1 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xc2)
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x24d0 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801EB IDE Controller (ICH5) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x24d3 (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 17
iic0 at ichsmb0: I2C bus
auich0 at pci0 dev 31 function 5: i82801EB (ICH5) AC-97 Audio
auich0: interrupting at ioapic0 pin 17
auich0: ac97: Analog Devices AD1980 codec; headphone, 20 bit DAC, no 3D stereo
auich0: ac97: ext id 3c3<AMAP,LDAC,SDAC,CDAC,DRA,VRA>
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2793128940 Hz quality 3000
auich0: measured ac97 link rate at 48005 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
wd0 at atabus0 drive 0: <ST340015A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38166 MB, 77545 cyl, 16 head, 63 sec, 512 bytes/sect x 78165360 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <DW-224E-B, , 4.6A> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

dmesg HP_dc7100_CeleronD_2.66G

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0 (GENERIC) #0: Sun Apr 26 18:50:08 UTC 2009
	builds@b6.netbsd.org:/home/builds/ab/netbsd-5-0-RELEASE/i386/200904260229Z-obj/home/builds/ab/netbsd-5-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 503 MB
avail memory = 483 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP Compaq dc7100 USDT(PQ940PA) ( )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2661MHz, id 0xf49
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <COMPAQ,CPQ0968 ,20040920>, AslId <    ,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
npx1 at acpi0 (NCP, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
attimer1 at acpi0 (TIME, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
pckbc1 at acpi0 (PS2M, PNP0F13): aux port
pckbc1: irq 12
pckbc2 at acpi0 (KBD, PNP0303): kbd port
pckbc2: io 0x60,0x64 irq 1
FDC0 (PNP0700) at acpi0 not configured
APIC (PNP0003) at acpi0 not configured
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
WMID (PNP0C14) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2580 (rev. 0x04)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xe0000000, size 0x10000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2582 (rev. 0x04)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x2660 (rev. 0x03)
pci1 at ppb0 bus 32
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2662 (rev. 0x03)
pci2 at ppb1 bus 64
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci2 dev 0 function 0: Broadcom BCM5751 Gigabit Ethernet
bge0: interrupting at ioapic0 pin 17
bge0: ASIC BCM5750 A1 (0x4001), Ethernet address 00:15:60:50:61:e4
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2658 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2659 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 18
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x265a (rev. 0x03)
uhci2: interrupting at ioapic0 pin 21
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x265b (rev. 0x03)
uhci3: interrupting at ioapic0 pin 22
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x265c (rev. 0x03)
ehci0: interrupting at ioapic0 pin 20
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb2 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xd3)
pci3 at ppb2 bus 5
pci3: i/o space, memory space enabled
auich0 at pci0 dev 30 function 2: i82801FB (ICH6) AC-97 Audio
auich0: interrupting at ioapic0 pin 21
auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo
auich0: ac97: ext id 605<AC97_22,AMAP,SPDIF,VRA>
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2640 (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801FB IDE Controller (ICH6) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
piixide1 at pci0 dev 31 function 2
piixide1: Intel 82801FB Serial ATA/Raid Controller (rev. 0x03)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 19 for native-PCI interrupt
atabus2 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus3 at piixide1 channel 1
isa0 at ichlpcib0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2661539300 Hz quality 3000
auich0: measured ac97 link rate at 48003 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
wd0 at atabus2 drive 0: <SAMSUNG SP0411C/R>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 38166 MB, 77545 cyl, 16 head, 63 sec, 512 bytes/sect x 78165360 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg NEC_110Ge_Celeron_1.8G_1Tx1

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0 (TEST) #2: Sun Sep  6 17:30:20 JST 2009
	fukachan@elena.home.fml.org:/usr/src/sys/arch/i386/compile/TEST
total memory = 1021 MB
avail memory = 992 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
NEC           Express5800/110Ge [N8100-1447Y]                        (FR1.2      )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1795MHz, id 0x10661
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <PTLTD ,	 XSDT  ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
npx1 at acpi0 (MATH, PNP0C04)
npx1: io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
attimer1 at acpi0 (TIMR, PNP0100): AT Timer
attimer1: io 0x40-0x43,0x50-0x53 irq 0
pckbc1 at acpi0 (KBC0, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (MSE0, PNP0F13): aux port
pckbc2: irq 12
FWH (INT0800) at acpi0 not configured
COMA (PNP0501) at acpi0 not configured
COMB (PNP0501) at acpi0 not configured
LPT (PNP0401) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x29f0 (rev. 0x01)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x29f1 (rev. 0x01)
ppb0: unsupported PCI Express version
pci1 at ppb0 bus 1
pci1: no spaces enabled!
wm0 at pci0 dev 25 function 0: 82801I (AMT) LAN Controller, rev. 2
wm0: interrupting at ioapic0 pin 16
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 00:1f:d0:c6:7f:8a
igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2937 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2938 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: vendor 0x8086 product 0x2939 (rev. 0x02)
uhci2: interrupting at ioapic0 pin 22
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x293c (rev. 0x02)
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x2940 (rev. 0x02)
pci2 at ppb1 bus 5
pci2: no spaces enabled!
ppb2 at pci0 dev 28 function 4: vendor 0x8086 product 0x2948 (rev. 0x02)
pci3 at ppb2 bus 13
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
jmide0 at pci3 dev 0 function 0: vendor 0x197b product 0x2368
jmide0: 1 PATA port
jmide0: interrupting at ioapic0 pin 16
jmide0: PCI IDE interface used
jmide0: bus-master DMA support present
jmide0: primary channel wired to native-PCI mode
jmide0: primary channel is PATA
atabus7 at jmide0 channel 0
jmide0: secondary channel wired to native-PCI mode
jmide0: secondary channel is unused
ppb3 at pci0 dev 28 function 5: vendor 0x8086 product 0x294a (rev. 0x02)
pci4 at ppb3 bus 15
pci4: no spaces enabled!
uhci3 at pci0 dev 29 function 0: vendor 0x8086 product 0x2934 (rev. 0x02)
uhci3: interrupting at ioapic0 pin 19
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: vendor 0x8086 product 0x2935 (rev. 0x02)
uhci4: interrupting at ioapic0 pin 20
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: vendor 0x8086 product 0x2936 (rev. 0x02)
uhci5: interrupting at ioapic0 pin 21
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x293a (rev. 0x02)
ehci1: interrupting at ioapic0 pin 19
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x92)
pci5 at ppb4 bus 17
pci5: i/o space, memory space enabled
vga1 at pci5 dev 3 function 0: vendor 0x18ca product 0x0020 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2916 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2922
ahcisata0: interrupting at ioapic0 pin 17
ahcisata0: AHCI revision 1.2, 6 ports, 32 command slots, features 0xe322e080
atabus1 at ahcisata0 channel 0
atabus2 at ahcisata0 channel 1
atabus3 at ahcisata0 channel 2
atabus4 at ahcisata0 channel 3
atabus5 at ahcisata0 channel 4
atabus6 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x2930 (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 17
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
wd1 at atabus7 drive 0: <IC35L120AVV207-0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 115 GB, 239340 cyl, 16 head, 63 sec, 512 bytes/sect x 241254720 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1(jmide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd0 at atabus1 drive 0: <Hitachi HDT721010SLA360>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg NEC_110Ge_Celeron_1.8G_1Tx3

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0 (GENERIC) #0: Sun Apr 26 18:50:08 UTC 2009
	builds@b6.netbsd.org:/home/builds/ab/netbsd-5-0-RELEASE/i386/200904260229Z-obj/home/builds/ab/netbsd-5-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 2045 MB
avail memory = 1999 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
NEC           Express5800/110Ge [N8100-1447Y]                        (FR1.2      )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1795MHz, id 0x10661
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <PTLTD ,	 XSDT  ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
npx1 at acpi0 (MATH, PNP0C04)
npx1: io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
attimer1 at acpi0 (TIMR, PNP0100): AT Timer
attimer1: io 0x40-0x43,0x50-0x53 irq 0
pckbc1 at acpi0 (KBC0, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (MSE0, PNP0F13): aux port
pckbc2: irq 12
FWH (INT0800) at acpi0 not configured
COMA (PNP0501) at acpi0 not configured
COMB (PNP0501) at acpi0 not configured
LPT (PNP0401) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x29f0 (rev. 0x01)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x29f1 (rev. 0x01)
ppb0: unsupported PCI Express version
pci1 at ppb0 bus 1
pci1: no spaces enabled!
wm0 at pci0 dev 25 function 0: 82801I (AMT) LAN Controller, rev. 2
wm0: interrupting at ioapic0 pin 16
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 00:1f:d0:c6:7f:11
igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2937 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2938 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: vendor 0x8086 product 0x2939 (rev. 0x02)
uhci2: interrupting at ioapic0 pin 22
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x293c (rev. 0x02)
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x2940 (rev. 0x02)
pci2 at ppb1 bus 5
pci2: no spaces enabled!
ppb2 at pci0 dev 28 function 4: vendor 0x8086 product 0x2948 (rev. 0x02)
pci3 at ppb2 bus 13
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
jmide0 at pci3 dev 0 function 0: vendor 0x197b product 0x2368
jmide0: 1 PATA port
jmide0: interrupting at ioapic0 pin 16
jmide0: PCI IDE interface used
jmide0: bus-master DMA support present
jmide0: primary channel wired to native-PCI mode
jmide0: primary channel is PATA
atabus0 at jmide0 channel 0
jmide0: secondary channel wired to native-PCI mode
jmide0: secondary channel is unused
ppb3 at pci0 dev 28 function 5: vendor 0x8086 product 0x294a (rev. 0x02)
pci4 at ppb3 bus 15
pci4: no spaces enabled!
uhci3 at pci0 dev 29 function 0: vendor 0x8086 product 0x2934 (rev. 0x02)
uhci3: interrupting at ioapic0 pin 19
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: vendor 0x8086 product 0x2935 (rev. 0x02)
uhci4: interrupting at ioapic0 pin 20
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: vendor 0x8086 product 0x2936 (rev. 0x02)
uhci5: interrupting at ioapic0 pin 21
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x293a (rev. 0x02)
ehci1: interrupting at ioapic0 pin 19
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x92)
pci5 at ppb4 bus 17
pci5: i/o space, memory space enabled
satalink0 at pci5 dev 0 function 0
satalink0: Silicon Image SATALink 3114 (rev. 0x02)
satalink0: 33MHz PCI bus
satalink0: bus-master DMA support present
satalink0: using ioapic0 pin 16 for native-PCI interrupt
atabus1 at satalink0 channel 0
atabus2 at satalink0 channel 1
atabus3 at satalink0 channel 2
atabus4 at satalink0 channel 3
vga1 at pci5 dev 3 function 0: vendor 0x18ca product 0x0020 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2916 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2922
ahcisata0: interrupting at ioapic0 pin 17
ahcisata0: AHCI revision 1.2, 6 ports, 32 command slots, features 0xe322e080
atabus5 at ahcisata0 channel 0
atabus6 at ahcisata0 channel 1
atabus7 at ahcisata0 channel 2
atabus8 at ahcisata0 channel 3
atabus9 at ahcisata0 channel 4
atabus10 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x2930 (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 17
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
satalink0: port 0: device present, speed: 1.5Gb/s
satalink0: port 1: device present, speed: 1.5Gb/s
satalink0: port 2: device present, speed: 1.5Gb/s
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GSA-4163B, K4651J82415, A102> cdrom removable
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(jmide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd0 at atabus1 drive 0: <Hitachi HDT721010SLA360>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(satalink0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus2 drive 0: <Hitachi HDT721010SLA360>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(satalink0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd2 at atabus3 drive 0: <Hitachi HDT721010SLA360>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(satalink0:2:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex
raid0: RAID Level 1
raid0: Components: /dev/wd0a /dev/wd1a
raid0: Total Sectors: 32768000 (16000 MB)
boot device: raid0
root on raid0a dumps on raid0b
root file system type: ffs
raid1: Component /dev/wd0e being configured at col: 0
         Column: 0 Num Columns: 2
         Version: 2 Serial Number: 20090627 Mod Counter: 99
         Clean: Yes Status: 0
raid1: Component /dev/wd1e being configured at col: 1
         Column: 1 Num Columns: 2
         Version: 2 Serial Number: 20090627 Mod Counter: 99
         Clean: Yes Status: 0
raid1: RAID Level 1
raid1: Components: /dev/wd0e /dev/wd1e
raid1: Total Sectors: 227475200 (111071 MB)
raid2: Component /dev/wd0g being configured at col: 0
         Column: 0 Num Columns: 2
         Version: 2 Serial Number: 20090627 Mod Counter: 53
         Clean: Yes Status: 0
raid2: Component /dev/wd1g being configured at col: 1
         Column: 1 Num Columns: 2
         Version: 2 Serial Number: 20090627 Mod Counter: 53
         Clean: Yes Status: 0
raid2: RAID Level 1
raid2: Components: /dev/wd0g /dev/wd1g
raid2: Total Sectors: 1153433472 (563199 MB)
raid3: Component /dev/wd0h being configured at col: 0
         Column: 0 Num Columns: 2
         Version: 2 Serial Number: 20090627 Mod Counter: 57
         Clean: Yes Status: 0
raid3: Component /dev/wd1h being configured at col: 1
         Column: 1 Num Columns: 2
         Version: 2 Serial Number: 20090627 Mod Counter: 57
         Clean: Yes Status: 0
raid3: RAID Level 1
raid3: Components: /dev/wd0h /dev/wd1h
raid3: Total Sectors: 531655936 (259597 MB)
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg FMV_6667SL5

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0.2 (GENERIC) #0: Sat Feb  6 17:53:27 UTC 2010
	builds@b7.netbsd.org:/home/builds/ab/netbsd-5-0-2-RELEASE/i386/201002061851Z-obj/home/builds/ab/netbsd-5-0-2-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 510 MB
avail memory = 490 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
FUJITSU FMV5SLU161 ( )
mainbus0 (root)
cpu0 at mainbus0: Intel 686-class, 664MHz, id 0x683
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <FUJ   ,M72     ,00000102>, AslId <FUJ ,00000100>
LNKB: ACPI: Found matching pin for 0.31.INTB at func 3: 9
LNKD: ACPI: Found matching pin for 0.31.INTD at func 2: 11
LNKA: ACPI: Found matching pin for 0.1.INTA at func 0: 10
LNKA: ACPI: Found matching pin for 1.15.INTA at func 0: 10
LNKB: ACPI: Found matching pin for 1.13.INTA at func 0: 9
LNKC: ACPI: Found matching pin for 1.11.INTA at func 0: 5
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
FWH (INT0800) at acpi0 not configured
npx1 at acpi0 (MATH, PNP0C04)
npx1: io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
attimer1 at acpi0 (TIME, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pckbc1 at acpi0 (KBC, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F13): aux port
pckbc2: irq 12
UAR1 (PNP0501) at acpi0 not configured
LPT (PNP0400) at acpi0 not configured
FDC (PNP0700) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x7124 (rev. 0x03)
pchb0: random number generator enabled
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
vga1 at pci0 dev 1 function 0: vendor 0x8086 product 0x7125 (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
drm at vga1 not configured
ppb0 at pci0 dev 30 function 0: vendor 0x8086 product 0x2418 (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
fxp0 at pci1 dev 11 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 5
fxp0: Ethernet address 00:d0:b7:7f:3a:c1
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1 at pci1 dev 13 function 0: i82559 Ethernet, rev 8
fxp1: interrupting at irq 9
fxp1: Ethernet address 00:02:b3:24:f7:44
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ex0 at pci1 dev 15 function 0: can't map i/o space
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2410 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801AA IDE Controller (ICH) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2412 (rev. 0x02)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x2413 (rev. 0x02)
ichsmb0: interrupting at irq 9
iic0 at ichsmb0: I2C bus
auich0 at pci0 dev 31 function 5: i82801AA (ICH) AC-97 Audio
auich0: interrupting at irq 9
auich0: ac97: Crystal CS4299 codec; headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
auich0: ac97: ext id 201<AMAP,VRA>
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
auich0: measured ac97 link rate at 47988 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
wd0 at atabus0 drive 0: <FUJITSU MPF3102AT>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9736 MB, 19783 cyl, 16 head, 63 sec, 512 bytes/sect x 19941264 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <CRD-8480C, 1999/08/12, 1.04> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg DELL_PowerEdge_SC430

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1 (GENERIC) #0: Sun Nov  7 14:39:56 UTC 2010
	builds@b6.netbsd.org:/home/builds/ab/netbsd-5-1-RELEASE/i386/201011061943Z-obj/home/builds/ab/netbsd-5-1-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 1022 MB
avail memory = 992 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Inc.                 PowerEdge SC430              
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2527MHz, id 0xf41
ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <DELL  , PESC430,00000007>, AslId <ASL ,00000061>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (VBTN, PNP0C0C): ACPI Power Button
npx1 at acpi0 (FPU, PNP0C04): io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
pcppi1 at acpi0 (SPK, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x5f irq 0
FDC (PNP0700) at acpi0 not configured
COMA (PNP0501) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2778 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x2779 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x01)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 4: vendor 0x8086 product 0x27e0 (rev. 0x01)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 5: vendor 0x8086 product 0x27e2 (rev. 0x01)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci4 dev 0 function 0: Broadcom BCM5751 Gigabit Ethernet
bge0: interrupting at ioapic0 pin 17
bge0: ASIC BCM5750 A1 (0x4001), Ethernet address 00:12:3f:75:0d:a6
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x01)
uhci0: interrupting at ioapic0 pin 21
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x01)
uhci1: interrupting at ioapic0 pin 22
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x01)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x01)
uhci3: interrupting at ioapic0 pin 23
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x01)
ehci0: interrupting at ioapic0 pin 21
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xe1)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled
vga1 at pci5 dev 7 function 0: vendor 0x18ca product 0x0020 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x27b8 (rev. 0x01)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO timer reboot disabled by hardware; hope SMBIOS properly handles it.
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
piixide1 at pci0 dev 31 function 2
piixide1: Intel 82801GB/GR Serial ATA/Raid Controller (ICH7) (rev. 0x01)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 20 for native-PCI interrupt
atabus1 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus2 at piixide1 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x01)
ichsmb0: interrupting at ioapic0 pin 17
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
pckbc0 at isa0 port 0x60-0x64
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2527098990 Hz quality 3000
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: vendor 0x0566 product 0x3002, rev 1.10/1.01, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1
uhidev1: vendor 0x0566 product 0x3002, rev 1.10/1.01, addr 2, iclass 3/0
uhidev1: 4 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
uhid2 at uhidev1 reportid 4: input=1, output=0, feature=0
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <GCR-8483B, , 1.07> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd0 at atabus1 drive 0: <WDC WD2500JS-75NCB1>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484406 cyl, 16 head, 63 sec, 512 bytes/sect x 488281250 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus2 drive 0: <WDC WD2500JD-75HBB0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 232 GB, 484406 cyl, 16 head, 63 sec, 512 bytes/sect x 488281250 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(piixide1:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
raid0: RAID Level 1
raid0: Components: /dev/wd0a /dev/wd1a
raid0: Total Sectors: 2048128 (1000 MB)
boot device: raid0
root on raid0a dumps on raid0b
root file system type: ffs
raid2: Component /dev/wd0e being configured at col: 0
         Column: 0 Num Columns: 2
         Version: 2 Serial Number: 20101219 Mod Counter: -211364418
         Clean: Yes Status: 0
raid2: Component /dev/wd1e being configured at col: 1
         Column: 1 Num Columns: 2
         Version: 2 Serial Number: 20101219 Mod Counter: -211364418
         Clean: Yes Status: 0
raid2: RAID Level 1
raid2: Components: /dev/wd0e /dev/wd1e
raid2: Total Sectors: 20480384 (10000 MB)
raid3: Component /dev/wd0f being configured at col: 0
         Column: 0 Num Columns: 2
         Version: 2 Serial Number: 20101219 Mod Counter: 31
         Clean: Yes Status: 0
raid3: Component /dev/wd1f being configured at col: 1
         Column: 1 Num Columns: 2
         Version: 2 Serial Number: 20101219 Mod Counter: 31
         Clean: Yes Status: 0
raid3: RAID Level 1
raid3: Components: /dev/wd0f /dev/wd1f
raid3: Total Sectors: 463704064 (226418 MB)
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg JCS_Supermicro_P3TSSX

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1 (GENERIC) #0: Sun Nov  7 14:39:56 UTC 2010
	builds@b6.netbsd.org:/home/builds/ab/netbsd-5-1-RELEASE/i386/201011061943Z-obj/home/builds/ab/netbsd-5-1-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 382 MB
avail memory = 363 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Supermicro P3TSSR/P3TSSE (1234567890)
mainbus0 (root)
cpu0 at mainbus0: Intel 686-class, 1002MHz, id 0x68a
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId < INTEL,SOLANO70,20020621>, AslId <IMA ,00000097>
LNKB: ACPI: Found matching pin for 0.31.INTB at func 3: 5
LNKC: ACPI: Found matching pin for 0.31.INTC at func 4: 10
LNKD: ACPI: Found matching pin for 0.31.INTD at func 2: 11
LNKA: ACPI: Found matching pin for 0.2.INTA at func 0: 11
LNKD: ACPI: Found matching pin for 1.3.INTA at func 0: 11
LNKA: ACPI: Found matching pin for 1.4.INTA at func 0: 11
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
FDC0 (PNP0700) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
ECP (PNP0401) at acpi0 not configured
FWH (INT0800) at acpi0 not configured
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x1130 (rev. 0x04)
pchb0: random number generator enabled
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x1132 (rev. 0x04)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
drm at vga1 not configured
ppb0 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x05)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ppb1 at pci1 dev 0 function 0: vendor 0x1011 product 0x0024 (rev. 0x03)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
fxp0 at pci2 dev 4 function 0: i82558 Ethernet, rev 5
fxp0: interrupting at irq 11
fxp0: May need receiver lock-up workaround
fxp0: Ethernet address 00:08:c7:73:30:07
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1 at pci2 dev 5 function 0: i82558 Ethernet, rev 5
fxp1: interrupting at irq 5
fxp1: May need receiver lock-up workaround
fxp1: Ethernet address 00:08:c7:73:30:08
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 0
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp2 at pci1 dev 3 function 0: i82559 Ethernet, rev 8
fxp2: interrupting at irq 11
fxp2: Ethernet address 00:30:48:41:77:e0
inphy2 at fxp2 phy 1: i82555 10/100 media interface, rev. 4
inphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp3 at pci1 dev 4 function 0: i82559 Ethernet, rev 8
fxp3: interrupting at irq 11
fxp3: Ethernet address 00:30:48:41:77:e1
inphy3 at fxp3 phy 1: i82555 10/100 media interface, rev. 4
inphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2440 (rev. 0x05)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801BA IDE Controller (ICH2) (rev. 0x05)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2442 (rev. 0x05)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x2443 (rev. 0x05)
ichsmb0: interrupting at irq 5
iic0 at ichsmb0: I2C bus
uhci1 at pci0 dev 31 function 4: vendor 0x8086 product 0x2444 (rev. 0x05)
uhci1: interrupting at irq 10
usb1 at uhci1: USB revision 1.0
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
wd0 at atabus0 drive 0: <FUJITSU MPG3102AT E>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9773 MB, 19857 cyl, 16 head, 63 sec, 512 bytes/sect x 20015856 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <FX54++W, , U01H> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg NEC_i110Rb 1h_Core2Duo_2.16Gx2

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1 (GENERIC) #0: Sun Nov  7 14:39:56 UTC 2010
	builds@b6.netbsd.org:/home/builds/ab/netbsd-5-1-RELEASE/i386/201011061943Z-obj/home/builds/ab/netbsd-5-1-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 3454 MB
avail memory = 3382 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
NEC Express5800/i110Rb-1h [N8100-1472Y] (FR2.4)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2166MHz, id 0x6f6
cpu1 at mainbus0 apid 1: Intel 686-class, 2166MHz, id 0x6f6
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0 apid 3: pa 0xfec10000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
npx1 at acpi0 (MATH, PNP0C04): io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
COMA (PNP0501) at acpi0 not configured
COMB (PNP0501) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
ipmi0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x3590 (rev. 0x0c)
vendor 0x8086 product 0x3594 (miscellaneous system, revision 0x0c) at pci0 dev 1 function 0 not configured
ppb0 at pci0 dev 2 function 0: vendor 0x8086 product 0x3595 (rev. 0x0c)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 4 function 0: vendor 0x8086 product 0x3597 (rev. 0x0c)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci2 dev 0 function 0: Intel i82573L Gigabit Ethernet, rev. 0
wm0: interrupting at ioapic0 pin 16
wm0: PCI-Express bus
wm0: 256 word (8 address bits) SPI EEPROM
wm0: Ethernet address 00:24:21:7b:89:70
makphy0 at wm0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb2 at pci0 dev 5 function 0: vendor 0x8086 product 0x3598 (rev. 0x0c)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
wm1 at pci3 dev 0 function 0: Intel i82573L Gigabit Ethernet, rev. 0
wm1: interrupting at ioapic0 pin 16
wm1: PCI-Express bus
wm1: 256 word (8 address bits) SPI EEPROM
wm1: Ethernet address 00:24:21:7b:89:71
makphy1 at wm1 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb3 at pci0 dev 6 function 0: vendor 0x8086 product 0x3599 (rev. 0x0c)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
vga1 at pci4 dev 0 function 0: vendor 0x102b product 0x0522 (rev. 0x02)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
ppb4 at pci0 dev 28 function 0: vendor 0x8086 product 0x25ae (rev. 0x02)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x25a9 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x25aa (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
vendor 0x8086 product 0x25ab (miscellaneous system, revision 0x02) at pci0 dev 29 function 4 not configured
vendor 0x8086 product 0x25ac (interrupt system, interface 0x20, revision 0x02) at pci0 dev 29 function 5 not configured
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x25ad (rev. 0x02)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
ppb5 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x0a)
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x25a1 (rev. 0x02)
piixide0 at pci0 dev 31 function 2
piixide0: Intel 6300ESB Serial ATA Controller (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to native-PCI mode
piixide0: using ioapic0 pin 18 for native-PCI interrupt
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to native-PCI mode
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x25a4 (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 17
iic0 at ichsmb0: I2C bus
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
com1: console
pckbc0 at isa0 port 0x60-0x64
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2166930350 Hz quality 3000
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: ServerEngines SE USB Device, rev 1.10/0.01, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1
uhidev1: ServerEngines SE USB Device, rev 1.10/0.01, addr 2, iclass 3/1
ums0 at uhidev1: 8 buttons and Z dir
wsmouse0 at ums0 mux 0
ipmi0: version 2.0 interface KCS iobase 0xca2/2 spacing 1 irq 11
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM SW-9588, , NXU0> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 3, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(piixide0:0:0): using PIO mode 3, Ultra-DMA mode 4 (Ultra/66) (using DMA)
wd0 at atabus1 drive 0: <Hitachi HDS721032CLA362>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg ThinkPad_X61_OCZ VERTEX

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1 (VIPER) #0: Sat Dec 25 00:39:28 JST 2010
	fukachan@thinkpad.example.org:/var/tmp/build-5.1/obj/usr/src/sys/arch/i386/compile/VIPER
total memory = 3062 MB
avail memory = 2997 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 767378J (ThinkPad X61)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1995MHz, id 0x6fa
cpu0: Enhanced SpeedStep (1420 mV) 2200 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 2200 2000 1800 1600 1400 1200
cpu1 at mainbus0 apid 1: Intel 686-class, 1995MHz, id 0x6fa
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <LENOVO,TP-7V   ,00002210>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (FPU, PNP0C04): io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, IBM3780) (aux port): irq 12
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery (Control Method)
acpibat0: battery info: SANYO, LION, 42T4505   142
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
thinkpad0: using CMOS at \UCMS
thinkpad0: using EC at acpiecdt0
acpitz0 at acpi0 (THM0): critical 127.0C, passive cooling
acpitz1 at acpi0 (THM1): critical 100.0C passive 45.0C, passive cooling
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2a00 (rev. 0x0c)
agp0 at pchb0: detected 7676k stolen memory
agp0: aperture at 0xe0000000, size 0x20000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2a02 (rev. 0x0c)
vga1: WARNING: ignoring 64-bit BAR @ 0x10
vga1: WARNING: ignoring 64-bit BAR @ 0x18
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
vendor 0x8086 product 0x2a03 (miscellaneous display, revision 0x0c) at pci0 dev 2 function 1 not configured
wm0 at pci0 dev 25 function 0: Intel i82801H (M_AMT) LAN Controller, rev. 3
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 00:16:d3:c8:5e:91
igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2834 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2835 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x283a (rev. 0x03)
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 17
azalia0: host: 0x8086/0x284b (rev. 3), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x283f (rev. 0x03)
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2841 (rev. 0x03)
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ath0 at pci2 dev 0 function 0
ath0: interrupting at ioapic0 pin 17
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 10.3 phy 6.1 radio 10.2
uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2830 (rev. 0x03)
uhci2: interrupting at ioapic0 pin 16
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2831 (rev. 0x03)
uhci3: interrupting at ioapic0 pin 17
usb4 at uhci3: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x2836 (rev. 0x03)
ehci1: interrupting at ioapic0 pin 19
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3
usb5 at ehci1: USB revision 2.0
ppb2 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xf3)
pci3 at ppb2 bus 5
pci3: i/o space enabled
cbb0 at pci3 dev 0 function 0: vendor 0x1180 product 0x0476 (rev. 0xba)
cbb0: can't map socket base address 0xd7eff000
cbb0: can't map socket base address 0xc0a57c76: io mode
fwohci0 at pci3 dev 0 function 1: vendor 0x1180 product 0x0832 (rev. 0x04)
fwohci0: can't map OHCI register space
sdhc0 at pci3 dev 0 function 2: vendor 0x1180 product 0x0822 (rev. 0x21)
sdhc0: interrupting at ioapic0 pin 18
sdhc0: couldn't map register
cbb0: cacheline 0x8 lattimer 0x20
cbb0: bhlc 0x822008
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
cardbus0 at cardslot0: bus 6
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2811 (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801HEM Serial ATA Controller (ICH8M) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x283e (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1995173900 Hz quality 3000
azalia0: codec[0]: Analog Devices AD1984 (rev. 4.0), HDA rev. 1.0
azalia0: codec[1]: 0x14f1/0x2bfa (rev. 0.0), HDA rev. 0.9
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1] has no audio function groups
audio0 at azalia0: full duplex, playback, capture, independent
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 4 ports with 4 removable, self powered
ugen0 at uhub0 port 2
ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2
wd0 at atabus0 drive 0: <OCZ-VERTEX>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 61057 MB, 124053 cyl, 16 head, 63 sec, 512 bytes/sect x 125045424 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
ath0: ath_chan_set: unable to reset channel 7 (2442 MHz, flags 0x3e0 hal flags 0x140)
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg HA8000_130W_CF_SAS_RAID10

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1.0_PATCH (GENERIC) #1: Tue Sep  6 13:56:11 JST 2011
	fukachan@beth.office.fml.org:/var/tmp/build.i386.netbsd-5.1.0_PATCH/obj/var/.ourfs/netbsd-5.1.0_PATCH/usr/src/sys/arch/i386/compile/GENERIC
total memory = 3070 MB
avail memory = 3005 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
HITACHI HA8000/130 (0000130522)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1600MHz, id 0x6f6
cpu1 at mainbus0 apid 6: Intel 686-class, 1600MHz, id 0x6f6
cpu2 at mainbus0 apid 1: Intel 686-class, 1600MHz, id 0x6f6
cpu3 at mainbus0 apid 7: Intel 686-class, 1600MHz, id 0x6f6
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0 apid 3: pa 0xfec80000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <HTCLTD,X7DB8   ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
npx1 at acpi0 (MATH, PNP0C04): io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
FWHD (INT0800) at acpi0 not configured
pckbc1 at acpi0 (KBC0, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MSE0, PNP0F13) (aux port): irq 12
COM1 (PNP0501) at acpi0 not configured
COM2 (PNP0501) at acpi0 not configured
FDC (PNP0700) at acpi0 not configured
PRT (PNP0401) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
ipmi0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x25d8 (rev. 0xb1)
ppb0 at pci0 dev 2 function 0: vendor 0x8086 product 0x25f7 (rev. 0xb1)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci1 dev 0 function 0: vendor 0x8086 product 0x3500 (rev. 0x01)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci2 dev 0 function 0: vendor 0x8086 product 0x3510 (rev. 0x01)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci3 dev 0 function 0: vendor 0x8086 product 0x0329 (rev. 0x09)
ppb3: disabling notification events
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ahd0 at pci4 dev 2 function 0
ahd0: interrupting at ioapic0 pin 16
ahd0: aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100 MHz, 512 SCBs
scsibus0 at ahd0: 16 targets, 8 luns per target
ahd1 at pci4 dev 2 function 1
ahd1: interrupting at ioapic0 pin 17
ahd1: aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100 MHz, 512 SCBs
scsibus1 at ahd1: 16 targets, 8 luns per target
ppb4 at pci3 dev 0 function 2: vendor 0x8086 product 0x032a (rev. 0x09)
ppb4: disabling notification events
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci2 dev 2 function 0: vendor 0x8086 product 0x3518 (rev. 0x01)
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci6 dev 0 function 0: i80003 dual 1000baseT Ethernet, rev. 1
wm0: interrupting at ioapic0 pin 18
wm0: PCI-Express bus
wm0: 65536 word (16 address bits) SPI EEPROM
wm0: Ethernet address 00:30:48:26:40:dc
ikphy0 at wm0 phy 1: i82563 10/100/1000 media interface, rev. 2
ikphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm1 at pci6 dev 0 function 1: i80003 dual 1000baseT Ethernet, rev. 1
wm1: interrupting at ioapic0 pin 19
wm1: PCI-Express bus
wm1: 65536 word (16 address bits) SPI EEPROM
wm1: Ethernet address 00:30:48:26:40:dd
ikphy1 at wm1 phy 1: i82563 10/100/1000 media interface, rev. 2
ikphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb6 at pci1 dev 0 function 3: vendor 0x8086 product 0x350c (rev. 0x01)
ppb6: disabling notification events
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
ppb7 at pci0 dev 4 function 0: vendor 0x8086 product 0x25f8 (rev. 0xb1)
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
ppb8 at pci8 dev 0 function 0: vendor 0x8086 product 0x0370 (rev. 0x00)
ppb8: disabling notification events
pci9 at ppb8 bus 9
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
mfi0 at pci9 dev 14 function 0mfi0: interrupting at ioapic0 pin 18
mfi0: logical drives 1, version 5.1.1-0019, 128MB RAM
scsibus2 at mfi0: 64 targets, 8 luns per target
ppb9 at pci8 dev 0 function 2: vendor 0x8086 product 0x0372 (rev. 0x00)
ppb9: disabling notification events
pci10 at ppb9 bus 10
pci10: i/o space, memory space enabled, rd/line, wr/inv ok
ppb10 at pci0 dev 6 function 0: vendor 0x8086 product 0x25f9 (rev. 0xb1)
pci11 at ppb10 bus 11
pci11: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x8086 product 0x1a38 (miscellaneous system, revision 0xb1) at pci0 dev 8 function 0 not configured
pchb1 at pci0 dev 16 function 0
pchb1: vendor 0x8086 product 0x25f0 (rev. 0xb1)
pchb2 at pci0 dev 16 function 1
pchb2: vendor 0x8086 product 0x25f0 (rev. 0xb1)
pchb3 at pci0 dev 16 function 2
pchb3: vendor 0x8086 product 0x25f0 (rev. 0xb1)
pchb4 at pci0 dev 17 function 0
pchb4: vendor 0x8086 product 0x25f1 (rev. 0xb1)
pchb5 at pci0 dev 19 function 0
pchb5: vendor 0x8086 product 0x25f3 (rev. 0xb1)
pchb6 at pci0 dev 21 function 0
pchb6: vendor 0x8086 product 0x25f5 (rev. 0xb1)
pchb7 at pci0 dev 22 function 0
pchb7: vendor 0x8086 product 0x25f6 (rev. 0xb1)
ppb11 at pci0 dev 28 function 0: vendor 0x8086 product 0x2690 (rev. 0x09)
pci12 at ppb11 bus 12
pci12: i/o space, memory space enabled, rd/line, wr/inv ok
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2688 (rev. 0x09)
uhci0: interrupting at ioapic0 pin 22
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2689 (rev. 0x09)
uhci1: interrupting at ioapic0 pin 17
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x268c (rev. 0x09)
ehci0: interrupting at ioapic0 pin 23
ehci0: BIOS refuses to give up ownership, using force
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
ppb12 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xd9)
pci13 at ppb12 bus 13
pci13: i/o space, memory space enabled
vga1 at pci13 dev 1 function 0: vendor 0x1002 product 0x515e (rev. 0x02)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
drm at vga1 not configured
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2670 (rev. 0x09)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 631xESB/632xESB IDE Controller (rev. 0x09)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x269b (rev. 0x09)
ichsmb0: interrupting at ioapic0 pin 21
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1600086660 Hz quality 3000
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
scsibus2: waiting 2 seconds for devices to settle...
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <CD-224E-R, , P.CC> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd1 at atapibus0 drive 1: <HL-DT-ST DVDRAM GSA-4120B, M0047E55322, A110> cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
cd1(piixide0:0:1): using PIO mode 4, DMA mode 2 (using DMA)
sd0 at scsibus2 target 0 lun 0: <LSI, MegaRAID 8308ELP, 1.03> disk fixed
sd0: fabricating a geometry
sd0: 270 GB, 276976 cyl, 64 head, 32 sec, 512 bytes/sect x 567246848 sectors
sd0: fabricating a geometry
ipmi0: version 2.0 interface KCS iobase 0xcaa/8 spacing 4
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
mfi0: normal state on 'mfi0:0' (online)
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg NEC_110Gc_P4_3G

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1.0_PATCH (GENERIC) #1: Tue Sep  6 13:56:11 JST 2011
	fukachan@beth.office.fml.org:/var/tmp/build.i386.netbsd-5.1.0_PATCH/obj/var/.ourfs/netbsd-5.1.0_PATCH/usr/src/sys/arch/i386/compile/GENERIC
total memory = 1014 MB
avail memory = 985 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
NEC               Express5800/110Gc [N8100-1157Y]                                  (FR1.1      )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2992MHz, id 0xf49
cpu1 at mainbus0 apid 1: Intel 686-class, 2992MHz, id 0xf49
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
npx1 at acpi0 (MATH, PNP0C04): io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
hpet0 at acpi0 (MMTM, PNP0103): mem 0xfed03000-0xfed033ff
timecounter: Timecounter "hpet0" frequency 232830 Hz quality 2000
pckbc1 at acpi0 (KBC0, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MSE0, PNP0F13) (aux port): irq 12
FWH (INT0800) at acpi0 not configured
COMA (PNP0501) at acpi0 not configured
LPT (PNP0400) at acpi0 not configured
FDC (PNP0700) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2588 (rev. 0x05)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x2589 (rev. 0x05)
pci1 at ppb0 bus 1
pci1: no spaces enabled!
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x258a (rev. 0x05)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x2660 (rev. 0x03)
pci2 at ppb1 bus 2
pci2: no spaces enabled!
ppb2 at pci0 dev 28 function 1: vendor 0x8086 product 0x2662 (rev. 0x03)
pci3 at ppb2 bus 4
pci3: no spaces enabled!
ppb3 at pci0 dev 28 function 2: vendor 0x8086 product 0x2664 (rev. 0x03)
pci4 at ppb3 bus 6
pci4: no spaces enabled!
ppb4 at pci0 dev 28 function 3: vendor 0x8086 product 0x2666 (rev. 0x03)
pci5 at ppb4 bus 8
pci5: no spaces enabled!
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2658 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2659 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x265a (rev. 0x03)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x265b (rev. 0x03)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x265c (rev. 0x03)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb5 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xd3)
pci6 at ppb5 bus 10
pci6: i/o space, memory space enabled
wm0 at pci6 dev 11 function 0: Intel i82541GI 1000BASE-T Ethernet, rev. 5
wm0: interrupting at ioapic0 pin 17
wm0: 32-bit 33MHz PCI bus
wm0: 65536 word (16 address bits) SPI EEPROM
wm0: Ethernet address 00:14:85:f7:19:6c
igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2640 (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801FR Serial ATA/Raid Controller (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x266a (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2992648130 Hz quality 3000
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
wd0 at atabus0 drive 0: <ST3808110AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76293 MB, 155009 cyl, 16 head, 63 sec, 512 bytes/sect x 156250000 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <SAMSUNG CD-ROM  SC-148A, , B401> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg NEC_110Ge_E2160_RAID1

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1.0_PATCH (GENERIC) #0: Fri Aug 26 01:05:18 JST 2011
	fukachan@beth.office.fml.org:/var/tmp/build-5.1.0_PATCH/usr/src/sys/arch/i386/compile/GENERIC
total memory = 2045 MB
avail memory = 1998 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
NEC           Express5800/110Ge [N8100-1448Y]                        (FR1.2      )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1795MHz, id 0x6fd
cpu1 at mainbus0 apid 1: Intel 686-class, 1795MHz, id 0x6fd
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <PTLTD ,	 XSDT  ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
npx1 at acpi0 (MATH, PNP0C04): io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
pckbc1 at acpi0 (KBC0, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MSE0, PNP0F13) (aux port): irq 12
FWH (INT0800) at acpi0 not configured
COMA (PNP0501) at acpi0 not configured
COMB (PNP0501) at acpi0 not configured
LPT (PNP0401) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x29f0 (rev. 0x01)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x29f1 (rev. 0x01)
ppb0: unsupported PCI Express version
pci1 at ppb0 bus 1
pci1: no spaces enabled!
wm0 at pci0 dev 25 function 0: 82801I (AMT) LAN Controller, rev. 2
wm0: interrupting at ioapic0 pin 16
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 00:24:1d:32:4f:67
igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2937 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2938 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: vendor 0x8086 product 0x2939 (rev. 0x02)
uhci2: interrupting at ioapic0 pin 22
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x293c (rev. 0x02)
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x2940 (rev. 0x02)
pci2 at ppb1 bus 5
pci2: no spaces enabled!
ppb2 at pci0 dev 28 function 4: vendor 0x8086 product 0x2948 (rev. 0x02)
pci3 at ppb2 bus 13
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
jmide0 at pci3 dev 0 function 0: vendor 0x197b product 0x2368
jmide0: 1 PATA port
jmide0: interrupting at ioapic0 pin 16
jmide0: PCI IDE interface used
jmide0: bus-master DMA support present
jmide0: primary channel wired to native-PCI mode
jmide0: primary channel is PATA
atabus0 at jmide0 channel 0
jmide0: secondary channel wired to native-PCI mode
jmide0: secondary channel is unused
ppb3 at pci0 dev 28 function 5: vendor 0x8086 product 0x294a (rev. 0x02)
pci4 at ppb3 bus 15
pci4: no spaces enabled!
uhci3 at pci0 dev 29 function 0: vendor 0x8086 product 0x2934 (rev. 0x02)
uhci3: interrupting at ioapic0 pin 19
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: vendor 0x8086 product 0x2935 (rev. 0x02)
uhci4: interrupting at ioapic0 pin 20
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: vendor 0x8086 product 0x2936 (rev. 0x02)
uhci5: interrupting at ioapic0 pin 21
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x293a (rev. 0x02)
ehci1: interrupting at ioapic0 pin 19
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x92)
pci5 at ppb4 bus 17
pci5: i/o space, memory space enabled
vga1 at pci5 dev 3 function 0: vendor 0x18ca product 0x0020 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2916 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2922
ahcisata0: interrupting at ioapic0 pin 17
ahcisata0: AHCI revision 1.2, 6 ports, 32 command slots, features 0xe322e080
atabus1 at ahcisata0 channel 0
atabus2 at ahcisata0 channel 1
atabus3 at ahcisata0 channel 2
atabus4 at ahcisata0 channel 3
atabus5 at ahcisata0 channel 4
atabus6 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x2930 (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 17
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1795578570 Hz quality 3000
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
atapibus0 at atabus0: 2 targets
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM SW-9590A, , X100> cdrom removable
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 3: device present, speed: 3.0Gb/s
ahcisata0 port 5: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 2: device present, speed: 3.0Gb/s
ahcisata0 port 4: device present, speed: 3.0Gb/s
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(jmide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
wd0 at atabus1 drive 0: <ST380815AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76293 MB, 155010 cyl, 16 head, 63 sec, 512 bytes/sect x 156250080 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus2 drive 0: <ST380815AS>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 76293 MB, 155010 cyl, 16 head, 63 sec, 512 bytes/sect x 156250080 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd2 at atabus3 drive 0: <Hitachi HDS5C3020ALA632>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd3 at atabus4 drive 0: <Hitachi HDS5C3020ALA632>
wd3: drive supports 16-sector PIO transfers, LBA48 addressing
wd3: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd3(ahcisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd4 at atabus5 drive 0: <Hitachi HDS5C3020ALA632>
wd4: drive supports 16-sector PIO transfers, LBA48 addressing
wd4: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
wd4: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd4(ahcisata0:4:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd5 at atabus6 drive 0: <Hitachi HDS5C3020ALA632>
wd5: drive supports 16-sector PIO transfers, LBA48 addressing
wd5: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
wd5: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd5(ahcisata0:5:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
raid0: RAID Level 1
raid0: Components: /dev/wd0a /dev/wd1a
raid0: Total Sectors: 147859328 (72196 MB)
boot device: raid0
root on raid0a dumps on raid0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg NEC_S70_PJ_ST3808110AS

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1.2_PATCH (GENERIC) #3: Wed Feb 29 14:43:38 JST 2012
	fukachan@makros.fml.org:/pub/obj/build.i386.netbsd-5.1.2_PATCH/obj/pub/build/netbsd-5.1.2_PATCH/usr/src/sys/arch/i386/compile/GENERIC
total memory = 695 MB
avail memory = 671 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
NEC Express5800/S70 [N8100-9021] (FR1.1)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2793MHz, id 0x20655
cpu1 at mainbus0 apid 4: Intel 686-class, 2793MHz, id 0x20655
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <PTLTD ,	 XSDT  ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
npx1 at acpi0 (MATH, PNP0C04): io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff irq 0,8
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43,0x50-0x53
COM1 (PNP0501) at acpi0 not configured
COM2 (PNP0501) at acpi0 not configured
pckbc1 at acpi0 (KBC0, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MSE0, PNP0F13) (aux port): irq 12
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x0040 (rev. 0x02)
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x0042 (rev. 0x02)
vga1: WARNING: ignoring 64-bit BAR @ 0x10
vga1: WARNING: ignoring 64-bit BAR @ 0x18
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
wm0 at pci0 dev 25 function 0: PCH LAN (82578DM) Controller, rev. 6
wm0: interrupting at ioapic0 pin 16
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 8c:89:a5:1f:90:c0
ukphy0 at wm0 phy 2: Generic IEEE 802.3u media interface
ukphy0: OUI 0x00c82e, model 0x0004, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x3b3c (rev. 0x06)
ehci0: interrupting at ioapic0 pin 16
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 16
azalia0: host: 0x8086/0x3b56 (rev. 6), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x3b42 (rev. 0x06)
ppb0: unsupported PCI Express version
pci1 at ppb0 bus 5
pci1: no spaces enabled!
ppb1 at pci0 dev 28 function 4: vendor 0x8086 product 0x3b4a (rev. 0x06)
ppb1: unsupported PCI Express version
pci2 at ppb1 bus 13
pci2: no spaces enabled!
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x3b34 (rev. 0x06)
ehci1: interrupting at ioapic0 pin 16
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ppb2 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xa6)
pci3 at ppb2 bus 17
pci3: i/o space, memory space enabled
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x3b16 (rev. 0x06)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x3b25
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: AHCI revision 0x10300, 6 ports, 32 command slots, features 0xe322e020
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
vendor 0x8086 product 0x3b30 (SMBus serial bus, revision 0x06) at pci0 dev 31 function 3 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: Realtek ALC888 (rev. 2.2), HDA rev. 1.0
audio0 at azalia0: full duplex, playback, capture, independent
uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 4: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0: <ST3808110AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
ahcisata0 port 2: PHY offline
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
ahcisata0 port 3: PHY offline
wd1 at atabus1 drive 0: <ST3808110AS>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 76293 MB, 155009 cyl, 16 head, 63 sec, 512 bytes/sect x 156250000 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub2 at uhub0 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3 at uhub1 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub3: 8 ports with 8 removable, self powered
atapibus0 at atabus4: 1 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVDROM DH40N, 112HF012326, NP02> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:4:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhidev0 at uhub3 port 7 configuration 1 interface 0
uhidev0: CHICONY HP Basic USB Keyboard - JP, rev 1.10/3.00, addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg NEC_S70_SR_G6950_1Tx2

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1.2 (HOME_SERVER) #0: Sat Feb 18 21:03:22 JST 2012
	fukachan@elena.home.fml.org:/var/nbbuild/build.i386.netbsd-5.1.2/obj/var/.ourfs/netbsd-5.1.2/usr/src/sys/arch/i386/compile/HOME_SERVER
total memory = 887 MB
avail memory = 859 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
NEC Express5800/S70 [N8100-9021] (FR1.1)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2793MHz, id 0x20655
cpu1 at mainbus0 apid 4: Intel 686-class, 2793MHz, id 0x20655
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <PTLTD ,	 XSDT  ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
npx1 at acpi0 (MATH, PNP0C04): io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff irq 0,8
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43,0x50-0x53
COM1 (PNP0501) at acpi0 not configured
COM2 (PNP0501) at acpi0 not configured
pckbc1 at acpi0 (KBC0, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MSE0, PNP0F13) (aux port): irq 12
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x0040 (rev. 0x02)
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x0042 (rev. 0x02)
vga1: WARNING: ignoring 64-bit BAR @ 0x10
vga1: WARNING: ignoring 64-bit BAR @ 0x18
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
wm0 at pci0 dev 25 function 0: PCH LAN (82578DM) Controller, rev. 6
wm0: interrupting at ioapic0 pin 16
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 8c:89:a5:ce:34:dd
ukphy0 at wm0 phy 2: Generic IEEE 802.3u media interface
ukphy0: OUI 0x00c82e, model 0x0004, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x3b3c (rev. 0x06)
ehci0: interrupting at ioapic0 pin 16
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x3b42 (rev. 0x06)
ppb0: unsupported PCI Express version
pci1 at ppb0 bus 5
pci1: no spaces enabled!
ppb1 at pci0 dev 28 function 4: vendor 0x8086 product 0x3b4a (rev. 0x06)
ppb1: unsupported PCI Express version
pci2 at ppb1 bus 13
pci2: no spaces enabled!
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x3b34 (rev. 0x06)
ehci1: interrupting at ioapic0 pin 16
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ppb2 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xa6)
pci3 at ppb2 bus 17
pci3: i/o space, memory space enabled
fxp0 at pci3 dev 0 function 0: i82550 Ethernet, rev 12
fxp0: interrupting at ioapic0 pin 16
fxp0: Ethernet address 00:0e:0c:74:72:0d
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x3b16 (rev. 0x06)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x3b22
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: AHCI revision 0x10300, 6 ports, 32 command slots, features 0xe322e020
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
vendor 0x8086 product 0x3b30 (SMBus serial bus, revision 0x06) at pci0 dev 31 function 3 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 2: PHY offline
ahcisata0 port 3: PHY offline
ahcisata0 port 4: PHY offline
wd0 at atabus0 drive 0: <Hitachi HDT721010SLA360>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus1 drive 0: <Hitachi HDT721010SLA360>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub2 at uhub1 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub0 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub3: 6 ports with 6 removable, self powered
uhub2: 8 ports with 8 removable, self powered
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
raid0: RAID Level 1
raid0: Components: /dev/wd0a /dev/wd1a
raid0: Total Sectors: 32768000 (16000 MB)
boot device: raid0
root on raid0a dumps on raid0b
root file system type: ffs
raid1: Component /dev/wd0e being configured at col: 0
         Column: 0 Num Columns: 2
         Version: 2 Serial Number: 20090627 Mod Counter: 472
         Clean: Yes Status: 0
raid1: Component /dev/wd1e being configured at col: 1
         Column: 1 Num Columns: 2
         Version: 2 Serial Number: 20090627 Mod Counter: 472
         Clean: Yes Status: 0
raid1: RAID Level 1
raid1: Components: /dev/wd0e /dev/wd1e
raid1: Total Sectors: 227475200 (111071 MB)
raid2: Component /dev/wd0g being configured at col: 0
         Column: 0 Num Columns: 2
         Version: 2 Serial Number: 20090627 Mod Counter: 426
         Clean: Yes Status: 0
raid2: Component /dev/wd1g being configured at col: 1
         Column: 1 Num Columns: 2
         Version: 2 Serial Number: 20090627 Mod Counter: 426
         Clean: Yes Status: 0
raid2: RAID Level 1
raid2: Components: /dev/wd0g /dev/wd1g
raid2: Total Sectors: 1153433472 (563199 MB)
raid3: Component /dev/wd0h being configured at col: 0
         Column: 0 Num Columns: 2
         Version: 2 Serial Number: 20090627 Mod Counter: 433
         Clean: Yes Status: 0
raid3: Component /dev/wd1h being configured at col: 1
         Column: 1 Num Columns: 2
         Version: 2 Serial Number: 20090627 Mod Counter: 433
         Clean: Yes Status: 0
raid3: RAID Level 1
raid3: Components: /dev/wd0h /dev/wd1h
raid3: Total Sectors: 531655936 (259597 MB)
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg NEC_i110Ra 1h_PenM_1.73G

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.2_STABLE (NSRG_SERVER) #0: Thu May  1 19:03:51 JST 2014
	fukachan@nfgw24.office.fml.org:/var/nbbuild/build.m_i386.netbsd-5.2_STABLE/obj/var/NetBSD/netbsd-5.2.0_STABLE/usr/src/sys/arch/i386/compile/NSRG_SERVER
total memory = 502 MB
avail memory = 481 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
NEC    Express5800/i110Ra-1h [N8100-1119]        (FR1.1  )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1729MHz, id 0x6d8
cpu0: Enhanced SpeedStep (1308 mV) 1733 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 1733 1600 1467 1333 1200 1067 933 800
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <IntelR,AWRDACPI,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
UAR1 (PNP0501) at acpi0 not configured
FWH (INT0800) at acpi0 not configured
FAN (PNP0C0B) at acpi0 not configured
acpitz0 at acpi0 (THRM): active cooling level 0: 75.0C critical 75.0C passive 40.0C
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2590 (rev. 0x04)
pchb0: returns constant 0xff stream, RNG disabled.
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xc0000000, size 0x10000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2592 (rev. 0x04)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x2660 (rev. 0x05)
ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci1 dev 0 function 0: Intel i82573E, rev. 3
wm0: interrupting at ioapic0 pin 16
wm0: PCI-Express bus
wm0: 256 word (8 address bits) SPI EEPROM
wm0: Ethernet address 00:16:17:9f:8b:84
makphy0 at wm0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2662 (rev. 0x05)
ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wm1 at pci2 dev 0 function 0: Intel i82573E, rev. 3
wm1: interrupting at ioapic0 pin 17
wm1: PCI-Express bus
wm1: 256 word (8 address bits) SPI EEPROM
wm1: Ethernet address 00:16:17:9f:8b:83
makphy1 at wm1 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2658 (rev. 0x05)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x265c (rev. 0x05)
ehci0: interrupting at ioapic0 pin 23
ehci0: BIOS refuses to give up ownership, using force
ehci0: EHCI version 1.0
ehci0: companion controller, 2 ports each: uhci0
usb1 at ehci0: USB revision 2.0
ppb2 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xd5)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
fxp0 at pci3 dev 8 function 0: Intel PRO/100 VM Network Controller with 82562ET/EZ/GT/GZ PHY, rev 5
fxp0: interrupting at ioapic0 pin 20
fxp0: Ethernet address 00:16:17:9f:8b:82
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2640 (rev. 0x05)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801FB Serial ATA/Raid Controller (rev. 0x05)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x266a (rev. 0x05)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
pckbc0 at isa0 port 0x60-0x64
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
wd0 at atabus0 drive 0: <ST380013AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76293 MB, 155010 cyl, 16 head, 63 sec, 512 bytes/sect x 156250080 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1 at atabus0 drive 1: <WDC WD800JD-19MSA1>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 76293 MB, 155010 cyl, 16 head, 63 sec, 512 bytes/sect x 156250080 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
raid0: RAID Level 1
raid0: Components: /dev/wd0a /dev/wd1a
raid0: Total Sectors: 41943808 (20480 MB)
boot device: raid0
root on raid0a dumps on raid0b
root file system type: ffs
raid1: Component /dev/wd0e being configured at col: 0
         Column: 0 Num Columns: 2
         Version: 2 Serial Number: 20140501 Mod Counter: 58
         Clean: Yes Status: 0
raid1: Component /dev/wd1e being configured at col: 1
         Column: 1 Num Columns: 2
         Version: 2 Serial Number: 20140501 Mod Counter: 58
         Clean: Yes Status: 0
raid1: RAID Level 1
raid1: Components: /dev/wd0e /dev/wd1e
raid1: Total Sectors: 105916416 (51717 MB)
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg ONAMAE_VPS_2012_OSC_Trial

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.0_BETA (GENERIC) #0: Thu Mar 29 03:16:32 JST 2012
	root@makros.fml.org:/usr/netbsd-6_KVM/build.i386.netbsd-6.0_BETA/obj/usr/netbsd-6_KVM/src/sys/arch/i386/compile/GENERIC
total memory = 1023 MB
avail memory = 993 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Red Hat KVM
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Core(TM)2 Duo CPU     T7700  @ 2.40GHz, id 0x6fb
cpu1 at mainbus0 apid 1: Intel(R) Core(TM)2 Duo CPU     T7700  @ 2.40GHz, id 0x6fb
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <BOCHS ,BXPCRSDT,00000001>, AslId <BXPC,00000001>
LNKS: ACPI: Found matching pin for 0.1.INTA at func 3: 9
LNKD: ACPI: Found matching pin for 0.1.INTD at func 2: 11
LNKC: ACPI: Found matching pin for 0.3.INTA at func 0: 11
LNKD: ACPI: Found matching pin for 0.4.INTA at func 0: 11
LNKA: ACPI: Found matching pin for 0.5.INTA at func 0: 10
LNKB: ACPI: Found matching pin for 0.6.INTA at func 0: 10
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12
FDC0 (PNP0700) at acpi0 not configured
COM1 (PNP0501) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x1237 (rev. 0x02)
pcib0 at pci0 dev 1 function 0: vendor 0x8086 product 0x7000 (rev. 0x00)
piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 1 function 2: vendor 0x8086 product 0x7020 (rev. 0x01)
uhci0: interrupting at ioapic0 pin 11
usb0 at uhci0: USB revision 1.0
piixpm0 at pci0 dev 1 function 3: vendor 0x8086 product 0x7113 (rev. 0x03)
timecounter: Timecounter "piixpm0" frequency 3579545 Hz quality 1000
piixpm0: 24-bit timer
piixpm0: LNKS: _SRS failed: AE_NOT_FOUND
interrupting at ioapic0 pin 9
iic0 at piixpm0: I2C bus
vga1 at pci0 dev 2 function 0: vendor 0x1013 product 0x00b8 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
drm at vga1 not configured
virtio0 at pci0 dev 3 function 0
virtio0: Virtio Network Device (rev. 0x00)
vioif0 at virtio0: Ethernet address 02:16:3e:44:f9:2d
virtio0: allocated 20480 byte for virtqueue 0 for rx, size 256
virtio0: using 8192 byte (512 entries) indirect descriptors
virtio0: allocated 81920 byte for virtqueue 1 for tx, size 256
virtio0: using 69632 byte (4352 entries) indirect descriptors
virtio0: allocated 8192 byte for virtqueue 2 for control, size 64
virtio0: interrupting at ioapic0 pin 11
virtio1 at pci0 dev 4 function 0
virtio1: Virtio Block Device (rev. 0x00)
ld0 at virtio1
virtio1: allocated 45056 byte for virtqueue 0 for I/O request, size 128
virtio1: using 36864 byte (2304 entries) indirect descriptors
ld0: 20480 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 41943040 sectors
virtio1: interrupting at ioapic0 pin 11
virtio2 at pci0 dev 5 function 0
virtio2: Virtio Block Device (rev. 0x00)
ld1 at virtio2
virtio2: allocated 45056 byte for virtqueue 0 for I/O request, size 128
virtio2: using 36864 byte (2304 entries) indirect descriptors
ld1: 81920 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 167772160 sectors
virtio2: interrupting at ioapic0 pin 10
virtio3 at pci0 dev 6 function 0
virtio3: Virtio Memory Balloon Device (rev. 0x00)
viomb0 at virtio3
virtio3: allocated 8192 byte for virtqueue 0 for inflate, size 128
virtio3: allocated 8192 byte for virtqueue 1 for deflate, size 128
virtio3: interrupting at ioapic0 pin 10
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
attimer0: attached to pcppi0
isapnp0: no ISA Plug 'n Play devices found
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3066889750 Hz quality 3000
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: QEMU 0.15.0 QEMU USB Tablet, rev 1.00/0.00, addr 2, iclass 3/0
ums0 at uhidev0: 3 buttons and Z dir
wsmouse1 at ums0 mux 0
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <QEMU DVD-ROM, QM00001, 0.15.0> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
Kernelized RAIDframe activated
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
clock: unknown CMOS layout
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg SAKURA_VPS_V2_1.2G_1480JPY

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.0_BETA (GENERIC) #0: Thu Mar 29 03:16:32 JST 2012
	root@makros.fml.org:/usr/netbsd-6_KVM/build.i386.netbsd-6.0_BETA/obj/usr/netbsd-6_KVM/src/sys/arch/i386/compile/GENERIC
total memory = 1227 MB
avail memory = 1193 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Bochs Bochs
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Core(TM)2 Duo CPU     T7700  @ 2.40GHz, id 0x6fb
cpu1 at mainbus0 apid 1: Intel(R) Core(TM)2 Duo CPU     T7700  @ 2.40GHz, id 0x6fb
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <BOCHS ,BXPCRSDT,00000001>, AslId <BXPC,00000001>
LNKS: ACPI: Found matching pin for 0.1.INTA at func 3: 9
LNKD: ACPI: Found matching pin for 0.1.INTD at func 2: 11
LNKC: ACPI: Found matching pin for 0.3.INTA at func 0: 11
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 100000000 Hz quality 2000
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12
FDC0 (PNP0700) at acpi0 not configured
COM1 (PNP0501) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x1237 (rev. 0x02)
pcib0 at pci0 dev 1 function 0: vendor 0x8086 product 0x7000 (rev. 0x00)
piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 1 function 2: vendor 0x8086 product 0x7020 (rev. 0x01)
uhci0: interrupting at ioapic0 pin 11
usb0 at uhci0: USB revision 1.0
piixpm0 at pci0 dev 1 function 3: vendor 0x8086 product 0x7113 (rev. 0x03)
timecounter: Timecounter "piixpm0" frequency 3579545 Hz quality 1000
piixpm0: 24-bit timer
piixpm0: LNKS: _SRS failed: AE_NOT_FOUND
interrupting at ioapic0 pin 9
iic0 at piixpm0: I2C bus
vga1 at pci0 dev 2 function 0: vendor 0x1234 product 0x1111 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
drm at vga1 not configured
wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03)
wm0: interrupting at ioapic0 pin 11
wm0: 32-bit 33MHz PCI bus
wm0: 64 word (6 address bits) MicroWire EEPROM
wm0: Ethernet address 52:54:01:00:61:43
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
attimer0: attached to pcppi0
isapnp0: no ISA Plug 'n Play devices found
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2660139720 Hz quality 3000
wd0 at atabus0 drive 0
wd0: <QEMU HARDDISK>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 20480 MB, 41610 cyl, 16 head, 63 sec, 512 bytes/sect x 41943040 sectors
wd0: 32-bit data port
wd1 at atabus0 drive 1
wd1: <QEMU HARDDISK>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 10240 MB, 20805 cyl, 16 head, 63 sec, 512 bytes/sect x 20971520 sectors
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
wd1: 32-bit data port
wd0(piixide0:0:0): using PIO mode 0
wd1(piixide0:0:1): using PIO mode 0
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: QEMU 0.12.3 QEMU USB Tablet, rev 1.00/0.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse1 at ums0 mux 0
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <QEMU DVD-ROM, QM00003, 0.12.3> cdrom removable
cd0: 32-bit data port
cd0(piixide0:1:0): using PIO mode 3
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
clock: unknown CMOS layout
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg SAKURA_VPS_V2_1G_1480JPY

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.0_BETA (GENERIC) #0: Thu Mar 29 03:16:32 JST 2012
	root@makros.fml.org:/usr/netbsd-6_KVM/build.i386.netbsd-6.0_BETA/obj/usr/netbsd-6_KVM/src/sys/arch/i386/compile/GENERIC
total memory = 1023 MB
avail memory = 993 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Bochs Bochs
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Core(TM)2 Duo CPU     T7700  @ 2.40GHz, id 0x6fb
cpu1 at mainbus0 apid 1: Intel(R) Core(TM)2 Duo CPU     T7700  @ 2.40GHz, id 0x6fb
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <BOCHS ,BXPCRSDT,00000001>, AslId <BXPC,00000001>
LNKS: ACPI: Found matching pin for 0.1.INTA at func 3: 9
LNKD: ACPI: Found matching pin for 0.1.INTD at func 2: 11
LNKC: ACPI: Found matching pin for 0.3.INTA at func 0: 11
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 100000000 Hz quality 2000
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12
FDC0 (PNP0700) at acpi0 not configured
COM1 (PNP0501) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x1237 (rev. 0x02)
pcib0 at pci0 dev 1 function 0: vendor 0x8086 product 0x7000 (rev. 0x00)
piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 1 function 2: vendor 0x8086 product 0x7020 (rev. 0x01)
uhci0: interrupting at ioapic0 pin 11
usb0 at uhci0: USB revision 1.0
piixpm0 at pci0 dev 1 function 3: vendor 0x8086 product 0x7113 (rev. 0x03)
timecounter: Timecounter "piixpm0" frequency 3579545 Hz quality 1000
piixpm0: 24-bit timer
piixpm0: LNKS: _SRS failed: AE_NOT_FOUND
interrupting at ioapic0 pin 9
iic0 at piixpm0: I2C bus
vga1 at pci0 dev 2 function 0: vendor 0x1234 product 0x1111 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
drm at vga1 not configured
wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03)
wm0: interrupting at ioapic0 pin 11
wm0: 32-bit 33MHz PCI bus
wm0: 64 word (6 address bits) MicroWire EEPROM
wm0: Ethernet address 52:54:01:00:61:43
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
attimer0: attached to pcppi0
isapnp0: no ISA Plug 'n Play devices found
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2660084120 Hz quality 3000
wd0 at atabus0 drive 0
wd0: <QEMU HARDDISK>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 20480 MB, 41610 cyl, 16 head, 63 sec, 512 bytes/sect x 41943040 sectors
wd0: 32-bit data port
wd1 at atabus0 drive 1
wd1: <QEMU HARDDISK>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 10240 MB, 20805 cyl, 16 head, 63 sec, 512 bytes/sect x 20971520 sectors
wd1: 32-bit data port
wd0(piixide0:0:0): using PIO mode 0
wd1(piixide0:0:1): using PIO mode 0
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: QEMU 0.12.3 QEMU USB Tablet, rev 1.00/0.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse1 at ums0 mux 0
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <QEMU DVD-ROM, QM00003, 0.12.3> cdrom removable
cd0: 32-bit data port
cd0(piixide0:1:0): using PIO mode 3
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
/: replaying log to memory
root file system type: ffs
clock: unknown CMOS layout
/: replaying log to disk
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg SAKURA_VPS_V2_512M_980JPY

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.0_BETA (GENERIC) #0: Thu Mar 29 03:16:32 JST 2012
	root@makros.fml.org:/usr/netbsd-6_KVM/build.i386.netbsd-6.0_BETA/obj/usr/netbsd-6_KVM/src/sys/arch/i386/compile/GENERIC
total memory = 511 MB
avail memory = 489 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Bochs Bochs
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Core(TM)2 Duo CPU     T7700  @ 2.40GHz, id 0x6fb
cpu1 at mainbus0 apid 1: Intel(R) Core(TM)2 Duo CPU     T7700  @ 2.40GHz, id 0x6fb
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <BOCHS ,BXPCRSDT,00000001>, AslId <BXPC,00000001>
LNKS: ACPI: Found matching pin for 0.1.INTA at func 3: 9
LNKD: ACPI: Found matching pin for 0.1.INTD at func 2: 11
LNKC: ACPI: Found matching pin for 0.3.INTA at func 0: 11
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 100000000 Hz quality 2000
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12
FDC0 (PNP0700) at acpi0 not configured
COM1 (PNP0501) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x1237 (rev. 0x02)
pcib0 at pci0 dev 1 function 0: vendor 0x8086 product 0x7000 (rev. 0x00)
piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 1 function 2: vendor 0x8086 product 0x7020 (rev. 0x01)
uhci0: interrupting at ioapic0 pin 11
usb0 at uhci0: USB revision 1.0
piixpm0 at pci0 dev 1 function 3: vendor 0x8086 product 0x7113 (rev. 0x03)
timecounter: Timecounter "piixpm0" frequency 3579545 Hz quality 1000
piixpm0: 24-bit timer
piixpm0: LNKS: _SRS failed: AE_NOT_FOUND
interrupting at ioapic0 pin 9
iic0 at piixpm0: I2C bus
vga1 at pci0 dev 2 function 0: vendor 0x1234 product 0x1111 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
drm at vga1 not configured
wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03)
wm0: interrupting at ioapic0 pin 11
wm0: 32-bit 33MHz PCI bus
wm0: 64 word (6 address bits) MicroWire EEPROM
wm0: Ethernet address 52:54:00:01:51:82
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
attimer0: attached to pcppi0
isapnp0: no ISA Plug 'n Play devices found
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2660060400 Hz quality 3000
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: QEMU 0.12.3 QEMU USB Tablet, rev 1.00/0.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse1 at ums0 mux 0
wd0 at atabus0 drive 0
wd0: <QEMU HARDDISK>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 20480 MB, 41610 cyl, 16 head, 63 sec, 512 bytes/sect x 41943040 sectors
wd0: 32-bit data port
wd0(piixide0:0:0): using PIO mode 0
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <QEMU DVD-ROM, QM00003, 0.12.3> cdrom removable
cd0: 32-bit data port
cd0(piixide0:1:0): using PIO mode 3
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
clock: unknown CMOS layout
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg SAKURA_VPS_V3_1G_980JPY

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.0_BETA (GENERIC) #0: Thu Mar 29 03:16:32 JST 2012
	root@makros.fml.org:/usr/netbsd-6_KVM/build.i386.netbsd-6.0_BETA/obj/usr/netbsd-6_KVM/src/sys/arch/i386/compile/GENERIC
total memory = 1023 MB
avail memory = 993 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Red Hat KVM (RHEL 6.2.0 PC)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Xeon(R) CPU           E5645, id 0x206c1
cpu1 at mainbus0 apid 1: Intel(R) Xeon(R) CPU           E5645, id 0x206c1
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <BOCHS ,BXPCRSDT,00000001>, AslId <BXPC,00000001>
LNKS: ACPI: Found matching pin for 0.1.INTA at func 3: 9
LNKD: ACPI: Found matching pin for 0.1.INTD at func 2: 11
LNKC: ACPI: Found matching pin for 0.3.INTA at func 0: 11
LNKD: ACPI: Found matching pin for 0.4.INTA at func 0: 11
LNKA: ACPI: Found matching pin for 0.5.INTA at func 0: 10
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12
FDC0 (PNP0700) at acpi0 not configured
COM1 (PNP0501) at acpi0 not configured
hpet0 at acpi0 (HPET, PNP0103-0): high precision event timer (mem 0xfed00000-0xfed00400)
hpet0: invalid timer period
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x1237 (rev. 0x02)
pcib0 at pci0 dev 1 function 0: vendor 0x8086 product 0x7000 (rev. 0x00)
piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 1 function 2: vendor 0x8086 product 0x7020 (rev. 0x01)
uhci0: interrupting at ioapic0 pin 11
usb0 at uhci0: USB revision 1.0
piixpm0 at pci0 dev 1 function 3: vendor 0x8086 product 0x7113 (rev. 0x03)
timecounter: Timecounter "piixpm0" frequency 3579545 Hz quality 1000
piixpm0: 24-bit timer
piixpm0: LNKS: _SRS failed: AE_NOT_FOUND
interrupting at ioapic0 pin 9
iic0 at piixpm0: I2C bus
vga1 at pci0 dev 2 function 0: vendor 0x1234 product 0x1111 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
drm at vga1 not configured
wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03)
wm0: interrupting at ioapic0 pin 11
wm0: 32-bit 33MHz PCI bus
wm0: 64 word (6 address bits) MicroWire EEPROM
wm0: Ethernet address 52:54:05:00:44:77
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
virtio0 at pci0 dev 4 function 0
virtio0: Virtio Block Device (rev. 0x00)
ld0 at virtio0
virtio0: allocated 45056 byte for virtqueue 0 for I/O request, size 128
virtio0: using 36864 byte (2304 entries) indirect descriptors
ld0: 100 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 209715200 sectors
virtio0: interrupting at ioapic0 pin 11
virtio1 at pci0 dev 5 function 0
virtio1: Virtio Memory Balloon Device (rev. 0x00)
viomb0 at virtio1
virtio1: allocated 8192 byte for virtqueue 0 for inflate, size 128
virtio1: allocated 8192 byte for virtqueue 1 for deflate, size 128
virtio1: interrupting at ioapic0 pin 10
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
attimer0: attached to pcppi0
isapnp0: no ISA Plug 'n Play devices found
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: QEMU 0.12.1 QEMU USB Tablet, rev 1.00/0.00, addr 2, iclass 3/0
ums0 at uhidev0: 3 buttons and Z dir
wsmouse1 at ums0 mux 0
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <QEMU DVD-ROM, QM00003, 0.12.1> cdrom removable
cd0: 32-bit data port
cd0(piixide0:1:0): using PIO mode 3
Kernelized RAIDframe activated
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
clock: unknown CMOS layout
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg SAKURA_VPS_V3_2G_1480JPY

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.0_BETA (GENERIC) #0: Thu Mar 29 03:16:32 JST 2012
	root@makros.fml.org:/usr/netbsd-6_KVM/build.i386.netbsd-6.0_BETA/obj/usr/netbsd-6_KVM/src/sys/arch/i386/compile/GENERIC
total memory = 2047 MB
avail memory = 2000 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Red Hat KVM (RHEL 6.2.0 PC)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Xeon(R) CPU           E5645, id 0x206c1
cpu1 at mainbus0 apid 1: Intel(R) Xeon(R) CPU           E5645, id 0x206c1
cpu2 at mainbus0 apid 2: Intel(R) Xeon(R) CPU           E5645, id 0x206c1
ioapic0 at mainbus0 apid 3: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <BOCHS ,BXPCRSDT,00000001>, AslId <BXPC,00000001>
LNKS: ACPI: Found matching pin for 0.1.INTA at func 3: 9
LNKD: ACPI: Found matching pin for 0.1.INTD at func 2: 11
LNKC: ACPI: Found matching pin for 0.3.INTA at func 0: 11
LNKD: ACPI: Found matching pin for 0.4.INTA at func 0: 11
LNKA: ACPI: Found matching pin for 0.5.INTA at func 0: 10
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12
FDC0 (PNP0700) at acpi0 not configured
COM1 (PNP0501) at acpi0 not configured
hpet0 at acpi0 (HPET, PNP0103-0): high precision event timer (mem 0xfed00000-0xfed00400)
hpet0: invalid timer period
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x1237 (rev. 0x02)
pcib0 at pci0 dev 1 function 0: vendor 0x8086 product 0x7000 (rev. 0x00)
piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 1 function 2: vendor 0x8086 product 0x7020 (rev. 0x01)
uhci0: interrupting at ioapic0 pin 11
usb0 at uhci0: USB revision 1.0
piixpm0 at pci0 dev 1 function 3: vendor 0x8086 product 0x7113 (rev. 0x03)
timecounter: Timecounter "piixpm0" frequency 3579545 Hz quality 1000
piixpm0: 24-bit timer
piixpm0: LNKS: _SRS failed: AE_NOT_FOUND
interrupting at ioapic0 pin 9
iic0 at piixpm0: I2C bus
vga1 at pci0 dev 2 function 0: vendor 0x1234 product 0x1111 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
drm at vga1 not configured
wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03)
wm0: interrupting at ioapic0 pin 11
wm0: 32-bit 33MHz PCI bus
wm0: 64 word (6 address bits) MicroWire EEPROM
wm0: Ethernet address 52:54:06:00:62:37
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
virtio0 at pci0 dev 4 function 0
virtio0: Virtio Block Device (rev. 0x00)
ld0 at virtio0
virtio0: allocated 45056 byte for virtqueue 0 for I/O request, size 128
virtio0: using 36864 byte (2304 entries) indirect descriptors
ld0: 200 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 419430400 sectors
virtio0: interrupting at ioapic0 pin 11
virtio1 at pci0 dev 5 function 0
virtio1: Virtio Memory Balloon Device (rev. 0x00)
viomb0 at virtio1
virtio1: allocated 8192 byte for virtqueue 0 for inflate, size 128
virtio1: allocated 8192 byte for virtqueue 1 for deflate, size 128
virtio1: interrupting at ioapic0 pin 10
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
attimer0: attached to pcppi0
isapnp0: no ISA Plug 'n Play devices found
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: QEMU 0.12.1 QEMU USB Tablet, rev 1.00/0.00, addr 2, iclass 3/0
ums0 at uhidev0: 3 buttons and Z dir
wsmouse1 at ums0 mux 0
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <QEMU DVD-ROM, QM00003, 0.12.1> cdrom removable
cd0: 32-bit data port
cd0(piixide0:1:0): using PIO mode 3
Kernelized RAIDframe activated
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
clock: unknown CMOS layout
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

dmesg machine

[HOME] [github] [twitter] [blog] [fml4] [fml8] [北海道] Powered by NetBSD and [nuinui.net] .
Copyright (C) 1993-2022 Ken'ichi Fukamachi mail:< fukachan at fml.org >